Product name: X2 headlight assembly/high temperature resistant type
Material: high temperature resistant engineering plastic
Suitable models: CQR, JH125L, ZS125GY, ZS125GY-A, JH150GY-2, Wingman, X2, etc.
made in China
Special Commitment: Replace the broken baked goods(We also package the shipping cost)
Special orders are made by high-priced manufacturers, and the quality is higher than that of Loncin''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s original factory. It is one of the best X2 lamps in the market at present:
(In particular, it’s not the same-shaped lamps on the market or ours. This is a special order. This is the only one.)
1. The high temperature test directly on the xenon lamp is higher than that of ordinary bulbs and the test is more severe.
2. The lamp bowl was left standing and wrapped at a high temperature of 65 degrees for continuous testing for 20 hours without any damage.
Note: When riding, because there is wind to dissipate heat, the temperature is far not so high, and no one will turn on the headlights for 20 hours without rest, so I am completely assured that the lamp bowl may be burned out.
3. Special material heat-resistant lamp holder to prevent the possibility of lamp holder deformation;
4. The lamp bowl is smoked with black edges, which is more high-end;
5. The ventilation hole is equipped with a dust cover to prevent dust from entering;
6. PP clinker for lamp shell, not easy to break;
7. The installation position of the lamp shell is added with sponge foam to absorb shock;
8. The far and near beam adjustment screw has a spring(Ordinary no)
Test site:
1. High-quality high-temperature resistant X2 lamp
1. Install the xenon lamp and remove the small lamp to save the small hole
2. Install the temperature sensor
3. Turn on the power and the temperature rises slowly.
4. After the temperature is stabilized at 65 degrees and continue to bake for 20 hours, the lamp holder is still almost unchanged from the original.
Finally, add another rendering of the xenon lamp on
2. An ordinary quality X2 lamp(No intention to slander, just for reference)
1. Install the temperature sensor and test with the original bulb
2. Connect to the power supply
3. A few minutes after the temperature reaches 48 degrees, the lamp bowl will begin to bubble and deform
Each color display: