![](https://img.alicdn.com/imgextra/i4/2975396559/TB2GMDFiYxmpuFjSZJiXXXauVXa_!!2975396559.jpg)
![](https://img.alicdn.com/imgextra/i1/2975396559/TB2JN7chC0jpuFjy0FlXXc0bpXa_!!2975396559.jpg)
Yongnuo Flash Trigger YN560-TX
Support all YN560-III flash M/Multi listed after January 2013Two kinds of flash
lightUp to 6 groups of flash output and focal length remote control settings compatibleRF-602/RF-603/
RF-603II 16 channels are clearly displayed on a large screen, operationFast and easy-to-use transmission distance of 100 meters
Support RF-603/RF-603 II wireless shutter.
1. Channel settings
In standby mode, long press【ZOOM/CH】Key, channel and analog dial code on LCD The switch flashes, operation
【about】Key to switch channels,A total of 16 channels. When used with RF602/603/603II transceivers, the transceiver dials the code
The switch state must be consistent with the analog dial switch setting.
2. Set RF602/603 mode
In standby mode, long press【Hz/FN】Button, LCD displays the communication mode of the transceiver currently compatible with the product, the product defaults
Set compatible RF603 mode,operate【about】Key to switch between RF602 mode and RF603 mode, press【OK】
key to save and exit.
3. Activate 560-III
First set the 560-TX controller and 560-III flash to be compatible with the same transceiver communication mode(Controller settings like 2),
Then set the same''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''S channel(Controller such as 1), And then press the controller’s【ZOOM/CH】+
【Hz/FN】Button, at this time the flash LCDDisplay the interface, press the flash【OK】Key, 560-III is activated.
4. Modify group flash mode
In standby mode, long press【Gr】Key to switch a/b/c group page or d/e/f group page, then short press【Gr】Key to select a group,
After confirming the group,according to【MODE】Key, the flash mode will switch between M/Multi/--, which means flashing is prohibited.
5. Modify group flash output
After confirming the group selection(Such as 4), Use the arrow keys to modify the flash output. In M mode, press【up and down】Key flash output
Add or subtract 1/3 files respectively;according to【right left】Button flash output respectively plus or minus 1 file; in Multi mode, press【Up/right】Key flash output
Add one step and press【Down/left】Key minus 1 gear. In Multi mode, short press【Hz/FN】Key to switch to select and set flash frequency and flash
times, press【Up/right】Key up,according to【Down/left】Key down.
6. Modify group focal length
After confirming the group selection(Such as 4),dog【ZOOM/CH】Key to enter the focus setting mode, and then press【superior】
【Down】Left】【right】Key to modify the focal length, press【Up/right】The focal length of the key is gradually increased, press【Down/left】The key focal length is gradually reduced.
EditShort press after the focus is completed【ZOOM/CH】Key to save and return.
7. Test flash
First set the 560-TX controller and 560-III flash to be compatible with the same transceiver communication mode(Controller settings like 2)
Then set the same channel(The controller is set as 1),, in standby mode, press the controller【TEST】Key, flash
willWas awakened, the indicator light turns blue.Loosening【TEST】When the button is pressed, the flash will test flash once, and the indicator light will be red.
8. Use 560-TX for shooting
First, set the 560-TX controller and 560-III flash to be compatible with the same transceiver communication mode(Controller settings like 2),
Then set the same channel(The controller is set as 1),Fix the controller on the hot shoe of the camera so that all devices are booting
Under the state,Press the camera shutter release button halfway, the flash is awakened, and the indicator light turns blue. Press the camera shutter release button fully, the flash
Flash once.The controller and flash indicator lights are red.
![](https://img.alicdn.com/imgextra/i2/2975396559/TB2fwJ1c0hvOuFjSZFBXXcZgFXa_!!2975396559.jpg)