Triple Crown 49/52/55/58/62/67/72/77mm rubber lens hood, screwed in, shrinkable
Please be sure to note the required caliber when you take the photo, or contact Wangwang to inform, thank you!
The domestic rubber hood, screwed in, can shrink.
The screw can be screwed directly on the lens(Filter lens can be connected)It can also be screwed on the filter.
The role of the hood:
1. In the backlight, side light or flash photography, it can prevent the entry of non-imaging light and avoid fog.
2. It can prevent the scattered light from entering the lens when taking photos with forward light and side light.
3. In lighting photography or night photography, it can prevent the surrounding interference light from entering the lens.
4. It can prevent accidental damage to the lens, and it can also prevent fingers from touching the surface of the lens by mistake. It can also shield the lens from wind, sand, rain and snow to some extent.
There are many sizes of hoods, and the one that matches the focal length of the lens should be selected. The shorter the focal length of the lens, the larger the angle of view and the shorter the hood. If the hood of a standard lens is used on a wide-angle lens, it will inevitably produce the consequence that the image can not be imaged around the screen. On the contrary, it cannot play the role of the hood. When using a zoom lens, it is best to use a retractable lens hood that can be used for your own use.
Lens hoods are widely used in backlight photography, generally speaking, to avoid glare. However, if the light source is close, glare may still occur. At this time, you can use your hand to block the hood on the side where the light source is located. Whether the glare is eliminated, you must observe it clearly in the viewfinder.
________________________________________________________________________
Taobao Three Crown Stores:http://guatian.taobao.com
Contact number: 021-59991923 Mobile: 18930361923
Customer service prosperous: melon field and plums
If you have any questions about our products, please contact the above method, thank you!