USB Capture HDMI 4K Plus can input 4Kp60 4:4:4, supports HDMI 2.0 standard, and can capture up to 4Kp30. USB Capture SDI 4K Plus supports the maximum input and capture of 4Kp30, and supports 6G-SDI.
Supported operating system | - Windows
- Windows 7/8/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2016 (x86 & x64)
- Linux (support x86, x64 & ARM architecture)
- Ubuntu 12.04/14.04/16.04/17.04/17.10 (x86 & x64)
- CentOS 6.5/7 (x86 & x64)
- Fedora 25/26/27 (x86 & x64)
- Red hat 6.5 and above (x86 & x64)
- Other Linux systems with kernel version greater than or equal to 2.6.35
- Mac
- OS X 10.9/10.10/10.11
- macOS 10.12/10.13
- Chrome OS
|
---|
Recommended operating system(Tested) | - Windows
- Windows 7 Ultimate/8.1 Enterprise/10 Enterprise/Server 2008 R2 DataCenter/Server 2012 R2 DataCenter/Server 2016 R2 DataCenter (x86 & x64)
- Linux
- Ubuntu 12.04/14.04/16.04 (x86 & x64)
- Ubuntu 17.04/17.10 (x64)
- CentOS 6.5/7.2 (x86 & x64)
- Fedora 25/26 (x64)
- Red hat 6.5 (x86 & x64)
- Mac
- OS X 10.9.5/10.10/10.11.2/10.11.3/10.11.4
- macOS 10.12/10.13.2/10.13.3
|
---|
Supported APIs | - Windows
- DirectShow
- Wave API/DirectSound/WASAPI
- Linux
- OS X/macOS
|
---|
Supported software | - VLC
- VirtualDub
- OBS
- XSplit
- vMix
- VidBlaster
- Wirecast
- Microsoft Media Encoder
- Adobe Flash Media Encoder
- Any other encoding or streaming software that uses DirectShow, V4L2, QuickTime, AV Foundation programming interface
|
---|
input interface | - HDMI
- DVI-D 1.0
- HDMI 1.4
- HDMI 2.0
- 3.5mm jack
|
---|
Host interface | - USB 3.0
- Compatible with USB 2.0
- Compatible with USB 3.1 Gen 1
|
---|
Output Interface | |
---|
Loop out interface | |
---|
Input characteristics | - Input video supports up to 4096×2160 resolution
|
---|
HDMI signal related features | - 600MHz HDMI receiver
- Adaptive HDMI equalizer
- Support custom EDID
- Support extracting InfoFrame information of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut
- Support full colorimetry
- Supports up to 4096×2160 4:4:4 60fps input signal
- Support 2 channels of IES60958 standard audio stream
- Supports extraction of audio format information and channel status data
- Support for extracting video timing information
- Support for extracting 3D format information
- Support Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode
|
---|
Analog audio function | - Separate the audio in HDMI and output it through 3.5mm headphone jack
- Capable of collecting 3.5mm input microphone audio
- Integrated USB sound card function, can be played back through 3.5mm headphone jack, and can loop back to record the playback content of the machine.
|
---|
Acquisition format | - The acquisition signal resolution can support up to 4096×2160 pixels
- The acquisition frame rate can support up to 120fps (the actual acquisition frame rate may be limited by the USB bandwidth and internal working frequency. The typical acquisition frame rate on the Intel USB 3.0 controller is as follows)
- 1920×1080 YUY2 capture up to 90fps
- 3840×2160 NV12 capture up to 30fps
- Support 4:2:0 8-bit capture format: NV12, I420 (up to 4096×2160)
- Support 4:2:2 8-bit capture format: YUY2, UYVY (up to 4096×2160)
- Support 4:4:4 8-bit capture format: RGB24, RGB32 (up to 2048×2160)
- The default is YUY2, NV12 capture format, more capture formats can be set through the USB Capture Utility
|
---|
Video processing function | - Video processing pipeline processing bandwidth up to 640M pixels/s
- Video trimming
- Video zoom
- Video deinterlacing
- Two field lines staggered
- Two mixed
- Top field only
- Bottom field only
- Video aspect ratio conversion
- Automatic or manual selection of input video aspect ratio
- Automatically or manually select the aspect ratio of the captured video
- Three aspect ratio transformation modes: ignore (anisotropy), crop, fill (fill black borders up and down or left and right)
- Video color space conversion
- Automatic or manual selection of input color space and quantization range
- Automatic or manual selection of acquisition color space, quantization range and saturation range
- Support RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color space
- Support limited or complete quantification range
- Supports limited, complete and expanded saturation range of color gamut
- Video frame rate conversion
- The screen is flipped upside down or left and right mirrored
|
---|
One machine with multiple devices | - Support multiple USB devices in the same system
- The device can be set to use the serial number as the device name displayed in the system through the USB Capture Utility
|
---|
SDK | - The USB Capture SDK provides functions such as obtaining signal status and setting capture options.
|
---|
Firmware upgrade | - Multiple devices in the same system can be upgraded at the same time
|
---|
LED indicator | - The status of the LED light shows the working status of each channel: idle, input signal is locked, memory error or FPGA configuration error
|
---|
size | - 98.1mm (length) x 56.8mm (width) x 17mm (height)
|
---|
Accessories | |
---|
Power consumption | - Maximum current of 5V power supply: ~1.4A
- Maximum power consumption: ~7W
|
---|
working environment | - Operating temperature: 0 to 40 degrees Celsius
- Storage temperature: –20 to 70 degrees Celsius
- Relative humidity: 5% to 90% (non-condensing state)
|
---|