【Product name】 bicycle handle gloves
【brand】 Jiente GIANT
【length】 three specifications set:
  1. Left -handed 92mm /right hand 92mm
  2, left hand 135mm /right hand 135mm
  3, left hand 135mm /right hand 92mm
【Characteristics】  two kinds of materials independent positions, this technology can only be done by large factories. The black part is slightly harder, the gray part is soft, and the grip feels good. The gray site had to contact the palm to ease the fatigue on the hand.
【the inside diameter of】 Suitable for a handle with a diameter of 22.2mm at both ends
【Material】 German imported environmental protection materials (No smell)
Solemn suggestion: For personal health, please choose materials for quality pass.
【Open a hole】Bilateral opening
This handle can be paired with a small side handle because of bilateral opening. If you don''''''''''''''''t need a small side handle, you can also shoot the tail.
The tail plot link is as follows:
https://item.taobao.com/item.htm?spm=a1z10.1-c.w4004-12503346901.10.vjluBW&id=523167914873
The number of sets is limited below, while selling it, it needs to be started as soon as possible, thank you!
Please click more set>>>>here
https://shop137248774.taobao.com/category-1143422741.htm?spm=a1z10.1-c.w4010-12503346899.9.vjluBW&search=y&parentCatId=1143422739&parentCatName=%B3%B5%C1%E3%C5%E4%BC%FE&catName=%B0%D1%CC%D7%2F%B8%B1%B0%D1bd
Installation method: Wet the handle of the handle for easy installation. After drying, the sleeve is automatically fastened before the bicycle can be used.
Warning: Do not apply oil installation, which may cause the danger of slipping the suit when riding.
Instructions for buying the set:The small shop plastic sets are consistent with the inner diameter of Giant''''''''''''''''s genuine products, and they are suitable for 22mm handbars. Plastic installation factory is inflatable installation  dear can be heated warm water, which is slightly hotter than bath water. No matter what you buy, you must pay attention to whether the length is suitable, please actually measure the suitable set after the original handle length. The installation position such as the length of the set is slightly different, and the internal and external movements can be moved by the adjustment brake to increase or reduce the installation position. For a car with a side handle or prepare a side handle, please choose a two -headed handle.
Subject to buy instructions:The auxiliary pores are universal, and all the handlebars can be installed in theory. It turns out that the car with a side handle can be replaced directly. If the original car does not have a side handle, please pay attention. You must choose two hollow sets. In addition, it should be noted that the handlebars have enough installation positions. After installing the set, the handlebar must be revealed to be about 1.5cm before installing the side handle. The installation position can move the internal and external movements by the adjustment brake to increase or reduce the installation position.