Special film for racket backing Ultra-thin film/waterproof/balance point adjustment/thickened handle
================
Hand glue base film teach you how to save hand glue
================
If you are accustomed to adding a thin layer of hand glue on top of the original glue, you can consider removing the original glue and replacing it with this kind of base film to get a better sense of shock absorption and prevent sweat from penetrating into the handle and affecting the life of the wooden handle. .
If you are accustomed to using thick hand glue, the cost of thick hand glue is generally higher than that of thin hand glue, so you can consider using two layers of thin hand glue. Thin hand glue, but thick hand glue. If you have higher requirements, such as the shock absorbers and sweat infiltration mentioned above, and do not want to affect the balance of the racket, the inner layer is still recommended to use the base film, after all, the base film is more professional.
The base film is not hand glue, it is not a consumable. The layer can be used for a long time. If the thick hand glue with back glue is used outside, it is necessary to prevent the base film from sticking when the hand glue is pulled. In this case, you can wrap a layer of cling film or transparent tape or medical tape on the outside of the base film.
1. Used for bottoming of badminton racket handles to prevent sweat from penetrating into the wooden handles, causing the handles to deteriorate;
2. It is used for bottoming before wrapping the towel hand glue to avoid the back glue of the towel hand glue directly sticking to the handle, sticking to the handle or the handle skin.
How to use: After removing the old base glue, wrap it outside the wooden handle of the tennis racket or badminton racket with ordinary hand glue. At this time, the density and thickness of the base film can be adjusted according to personal preference.