Be sure to confirm the lens focal length and lens diameter before shooting, otherwise it cannot be used or there will be vignetting after use.
【Product name】:49mm metal hood+58mm lens cap Suit
【Scope of application】:Focal length 35mm and above(No vignetting), A lens with a lens diameter of 49mm(Such as: SonySonnar T* FE 35mm F2.8 ZA (SEL35F28Z);35mm F1.8 OSS (SEL35F18);DT 50mm F1.8 SAM (SAL50F18);FE 50mm F1.8(SEL50F18F);Sonnar T* FE 55mm F1.8 ZA (SEL55F18Z);E 50mm F1.8 OSS (SEL50F18)Wait for the lens.)Note: All models are not listed in detail. If you are not sure whether the lens in your hand can be used, you can compare it yourself or consult customer service for confirmation.
【colour】:Matt black
【specification】:Inner mouth diameter 49mmOuter diameter 58mmHeight 20mm(Note: After using the hood, the original 49mm lens cap cannot be used, and a 58mm lens cap is required.)
【texture】:All metal, external matte finish, internal threaded anti-reflective matte finish
【Function introduction】:Block unnecessary incident light, suppress the generation of ghosts and flare; anti-drop and anti-collision protect the lens.
【Installation method】:Screw mouth(Screw on the lens like a UV mirror or screw on the UV mirror/CPL polarizer)
【Whether to support reverse deduction】:not support
Note: In order to improve the product, all design/appearance/parameter changes have not been updated in time, please refer to the actual product.Please be aware that remote and express control areas are not within the scope of the package.
【The role of the hood】:
The hood is a commonly used photographic accessory set in front of the camera lens. It has a variety of textures such as metal, hard plastic, and soft rubber. It has the following functions:
1. It can prevent the entry of non-imaging light and avoid fog when shooting in backlight, side light or flash photography.
2. It can avoid the surrounding scattered light from entering the lens when shooting with forward light and side light.
3. In lighting photography or night photography, it can prevent the surrounding interference light from entering the lens.
4. It can prevent accidental damage to the lens, and it can also prevent fingers from accidentally touching the surface of the lens. It can also shield the lens from wind, sand, rain and snow to some extent.