Metco N2 100m wireless shutter release
Technical Parameters:
Control form: frequency 433MHz, four-bit encoding selection
Transmitter size: length 80× width 25× thickness 18mm
Receiver size: length 50× section 40× thickness 30(With hot shoe)Mm
Use battery: transmitter(23A),receiver(CR2)
Battery life: Approximately 1000 launches within the normal use range at room temperature
Launch distance: about 100 meters(In an open and undisturbed environment)
Set net weight: about 80 grams with battery
PU cord length: about 50 cm
Scope of application:
NIKON D80, D70S
Features:
①Exquisite and beautiful appearance, modern shape with decorative effect, light and small, the whole set is only palm-sized, easy to carry.
②Under good conditions, it can realize remote control in the range of up to 100 meters without directionality. It is very suitable for professional outdoor personnel, especially for geological prospecting, field shooting, mountain travel and other purposes. It is equipped with commonly used 23A and CR2 high-energy batteries, which are easy to buy.
③Control the camera''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s single-frame, continuous shooting, and bulb functions(Camera settings required), Support 3 seconds time-lapse shooting and group shooting function; the receiver can also be used alone when the battery is not installed, and can be used as a common electronic shutter release to achieve shutter focus, shutter and bulb
④The transmitter is equipped with a signal status indicator, which displays green when focusing, and displays red when the shutter or door B is open; the receiver settings are more user-friendly, not only designed with an independent power switch, but also a dual-light status indicator, that is, one light when the power is turned on Always on, the other light only lights up when the signal is received;
⑤Using high-grade PU slingshot cable as the connecting line, the length is about 50 cm when stowed, and about 150 cm when unfolded, which is convenient for daily carrying, and also provides opportunities for the receiver to leave the machine for concealed shooting or handheld shooting without power.
⑥Multi-layer high-grade blister packaging, the appearance display is clear at a glance, which not only increases the aesthetics, but also facilitates transportation and protection.
Instructions:
General shooting: Turn on the power switch of the receiver, when the transmitter function switch is set to B/□ state, single or continuous shooting of the camera can be realized(When the camera is set to single shooting, it supports single shooting function, and when the camera is set to continuous shooting, continuous shooting can be realized). Press the two switches, the transmitter will switch from focusing to shooting, and the indicator lights of the receiver will light up synchronously.
B door shooting: turn on the receiver power switch, when the transmitter function switch is set to B/□ state, and the camera shutter function is set to B state at the same time, press the two switches until the transmitter status indicator automatically goes out, receiving The transmitter indicates that it enters the shooting state accordingly. At this time, the receiver status indicator is steady red and the door B is open; if you need to end the door control, you only need to press the transmitter''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s two-position switch again.
Time-lapse shooting: Turn on the power switch of the receiver, when the transmitter function switch is set to ♂ state, press the two switches to start the camera focus and time-lapse shooting function. When the transmitter status indicator turns from focus to shooting, the receiver starts to flash automatically for a three-second delay to control the shutter action.
Manual function: In the state of no battery, the receiver can be operated independently, and the two switches have obvious hand feeling; lightly press to focus, and press it harder to realize the shutter action. If in the state of B door, long press to control B door time.
Group shooting function: Since multiple sets of wireless simultaneous use will cause mutual influence within a certain range, so the transmitter and receiver are equipped with four-bit encoding switches, which can avoid interference to a certain extent. When using the group shooting function, you only need to set all the transmitter''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s coding switches to □□□□ to effectively control all receivers in the area, and realize the control of camera focus, shutter and bulb.