Name: Pentax dedicated infrared remote control(Domestically produced, with battery, the insulating plastic sheet of the remote control belt must be taken out when in use)
After testing: K3 can not be used, please consult customer service before the buyer!
Model: ML-P
Applies to:
Pentax Digital SLR K-30/K-R/K5/K7/K-01
K-X/K10D/K20D/K110D/K100D/K200D/K100D
Pentax: digital camera: istD/istDS,
optio S/S4/S4i/S5i/S5n/SV/,
optio750z/555/550/450/430/330, EI2000
Pentax traditional cameras: ist, MZ6, ESPIO
Release mode: focus, shooting
Working distance: 30° unobstructed 5-10 meters on the front
Service life: about 50,000 times
Use battery: 3V lithium battery(CR2025)
Customer evaluation: Pentax remote control, feels good, compact and easy to carry.
Some points should be noted when using infrared remote control:
1. The camera itself must be adjusted to accept remote control.
2. Because it is an infrared remote control, the reason is the same as that of a TV remote control.
3. Same as the original remote control, the best angle of the remote control is the front of the lens (up to 10 meters away)
valid within) + 30 degrees to the right, other angles cannot be guaranteed.
Reminder: Pentax machine cannot use the remote control to focus under the factory default settings.
In the custom menu, turn on the AF during remote control, you can use auto focus.
After opening, not only can auto focus, but also B door.
And B door is very convenient, press once to open the shutter, press again to close the shutter, there is no need to hold the shutter for a long time, it is much easier.
For specific settings, please read the manual of Pentax SLR camera carefully.