Reminder: This product is a camera module without a driver board, so it cannot be directly connected to the Raspberry Pi development board for use! ! !
Raspberry Pi camera V2 version module (without driver board), 8 million pixels, 77.6 degree field of view, compatible with Raspberry Pi V2 version camera onboard interface. If you are using the V2 version of the Raspberry Pi camera and are not satisfied with the angle of view of its module, then you can consider using this one instead.
Camera parameters:
8,000,000 pixels
The photosensitive chip is Sony IMX219
Lens size: 6.5*6.5mm (official lens size 8.5*8.5mm)
Cable length: 8cm(Length can be customized)
The still picture resolution is 3280
Support 1080p30, 720p60 and 640 × 480p90 video recording
Camera parameters:
CMOS size: 1/4 inch
aperture(F): 2.0
focal length(Focal Length):2.96m
Field of view(FOV):77.6 degrees (the Raspberry Pi V2 version camera is only 62.2 degrees)
distortion(Distortion): ≪ 1%
Depth of field(Focusing Range):20cm ~ infinity
Software use:
1. RPi firmware and raspi-config have been updated for the camera, please execute apt-get update; apt-get upgrade;
2. Select camera in raspi-config, start the camera driver in the RPi firmware, and then restart
3. Use command line programs raspivid and raspistill to operate the camera and capture video clips or images
4. The captured video clip needs to be played by mplayer
Customers can log in to the following website to get more detailed instructions for using the Raspberry Pi camera:
http://www.raspberrypi.org/camera
http://www.raspberrypi.org/archives/tag/camera-board
http://www.raspberrypi.org/archives/3890
http://www.raspberrypi.org/downloads