Overview |
product | USB-6210 |
Product Series | Multi-function DAQ |
Bus type | USB |
Product number | 780103-01 , 779675-01 |
Operating system / object | Linux , Mac OS , Windows |
DAQ product family | M series |
Measurement type | Voltage |
Type of isolation | None |
Compliance with the RoHS directive | Yes |
USB powered | Bus-powered |
Analog input |
Number of channels | 16 , 8 |
Single-ended channel | 16 |
Differential channel | 8 |
Resolution | 16 bits |
Sampling Rate | 250 kS/s |
Analog input voltage | 10 V |
voltage range | -10 V - 10 V |
Accuracy of voltage range | 2.69 mV |
Sensitivity of voltage range | 91.6μV |
Small voltage range | -200 mV - 200 mV |
Accuracy in small voltage range | 0.088 mV |
Sensitivity in small voltage range | 4.8μV |
Number of ranges | 4 |
Simultaneous sampling | no |
On-board storage | 4095 samples |
Analog output |
Number of channels | 0 |
Digital I/O |
Two-way channel | 0 |
Input channel only | 4 |
Output channel only | 4 |
timing | software |
Logic level | TTL |
Input Current | Leakage current, source current |
Output current | Leakage current, source current |
Programmable input filter | no |
Support programmable power-on state? | Yes |
Single channel current drive capability | 16 mA |
Total current drive capacity | 50 mA |
Watchdog timer | no |
Support handshake I/O? | no |
Support mode I/O? | no |
Input range | 0 V - 5.25 V |
Output range | 0 V - 3.8 V |
Counter/timer |
Number of counters/timers | 2 |
Buffer operation | Yes |
Short-term pulse interference cancellation | Yes |
GPS synchronization | no |
Range | 0 V - 5.25 V |
Signal source frequency | 80 MHz |
Pulse generation | Yes |
Resolution | 32 bits |
Time base stability | 50 ppm |
Logic level | TTL |
|
|
|
|
|
|
|
Physical standards |
length | 16.9 cm |
width | 9.4 cm |
high | 3.1 cm |
I/O connector | Screw terminal |
Timing/triggering/synchronization |
trigger | number |