newextension:tg1488096402 |
|
![Technical Support: Almighty Promotion](https://img.alicdn.com/imgextra/i4/698818285/T2kWiEXC4XXXXXXXXX-698818285.png) |
newextensionend:tg1488096402 |
Special emphasis on the description: the strong bow strip is dedicated to Kasheng’s designated models
(TSF300A/300D/300TI/C7/TSF500 etc.), Other models are installed
If you don’t go down, other brands of rackets will be even worse.(Unless you cut yourself
Assemble), Please be sure before you buyMust understand.
There are 22 holes in the strong bow, and 7 large holes on the other two ends.(2.6 Double wire hole),
8 small holes in the middle(2.1 Single wire hole), Need to be used on other rackets or balls
Shoot other locationsFriends and relatives can refer to their racket hole positions and strong bow holes
Bit, corresponding to cutInto the hole.
![](https://img.alicdn.com/imgextra/imgextra/i1/326226838/T21CGdXlXaXXXXXXXX_!!326226838.jpg?time=1470270231000)
![](https://img.alicdn.com/imgextra/imgextra/i1/326226838/T2bCKdXkNaXXXXXXXX_!!326226838.jpg?time=1470270231000)
![](https://img.alicdn.com/imgextra/imgextra/i2/326226838/T279GdXk0aXXXXXXXX_!!326226838.jpg?time=1470270231000)
![](https://img.alicdn.com/imgextra/imgextra/i2/326226838/T249GdXk4aXXXXXXXX_!!326226838.jpg?time=1470270231000)
Suitable for badminton rackets such as 300A/300D/300TI/C7/TSF500.
The strong bow is a patented product of Kaisheng, so it can be seen on other rackets of other brands.
No, Tu Tu briefly introduces the function of the strong bow:
1. It can heavier the head and make the racket more offensive.
2. It can increase the elasticity of the thread.
3. It can prevent the racket from bursting with high pounds,Avoid collapse.
4. It can protect the line, especially for golfers who are used to checking the ball with a racket.
No thread and floor friction.
Strong bowUnlike single-grain ordering, it’s definitely more difficult to install it by hand.
Start from one end, when the wire tube is stuck in the racket wire hole, use a cone
Help me, pull a few more times, and find a way to hold the strong bowLine pipe alignment
The racket string hole, then press it with your hand to go in, and then smooth it step by step
Once installed, it’s OK.
Special reminder: The strong bow on the original factory racket is to be machined after it is installed.
The bell mouth is ironed, it is more beautiful and natural. After we personally install itNo
This condition is to be ironed by yourself, so some pro said how to install it and leave the ball
ShootUpStrong bow ratioIt’s not the same. This is a process problem.Bow strip
Thing, Unless you buy the tools for the ironing pipe and install it yourself
It’s hot. Someone said why it’s not hot and send it again. It’s even more depressed.
Okay, how can you put the goal into the shot hole?
Special note: As shown in the figure below, there is a small bubble on the strong bow which is the clamping point of the mold. It is a normal phenomenon. There will be long lines like this, and it will not affect the use. If you have made a mold, you should know how Going on.
![](https://img.alicdn.com/imgextra/i2/326226838/TB2vZ6XidRopuFjSZFtXXcanpXa_!!326226838.jpg)