Production material: aluminum alloy
Size: height 10CM, top diameter 4.5CM
Applicable models: basically applicable to all manual wave models
colour:Aluminum alloy primary color
Weight: about 300g
Note: Three different sizes of threaded rubber plugs are included in the loading accessories
Product Size:Mounting hole diameter 8mm-12mm, hole depth 6cm,Suitable for most cars. If the gear bar is longer or shorter,You can first measure the size of the original car''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s gear lever head installation.
Product composition: 1 gear handle + 3 installation threaded rubber sleeves(8MM+10MM+12MM
Production material: aluminum alloy
Size: height 10CM, top diameter 4.5CM
Applicable models: basically applicable to all manual wave models
colour:Aluminum alloy primary color
Weight: about 300g
Note: Three different sizes of threaded rubber plugs are included in the loading accessories
Product Size:Mounting hole diameter 8mm-12mm, hole depth 6cm,Suitable for most cars. If the gear bar is longer or shorter,You can first measure the size of the original car''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s gear lever head installation.
Product composition: 1 gear handle + 3 threaded rubber sleeves(8MM+10MM+12MM)
installation method:
1. Remove the original car''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s gearshift head
2. Remove the aluminum alloy sleeve at the bottom of the shift head
3. Take the rubber sleeve to fit the size of the gear lever
4. Put the rubber sleeve into the gear lever
5. Put the gear head directly on the gear lever (note, first put the aluminum alloy cover <> on the gear lever)
6. Align the small screws
7. Tighten the hex screws
8.Tighten the aluminum cover up
..........
.............
Template protection code
Template protection code
......
545698951818