Qingzhou Cuba official website has a discount, welcome website QZXX.com to place an order For more detailed introduction, please go to the bear''s websitehttps://qzxx.com/64202.htmlLearn about.
It is okay to work, stronger than unlicensed goods, and disassembled down. You can use it.
I did n’t want to make this product because of this low technology content, there are a few taunles of Taobao, but there is still a gap between the fine comparison.Do it, as shown in the original picture below, there are 6 SLM2 A1 cars charging. The bear only requires a point of three SLM 4A1. Silvercrest is a brand in Germany. This car is actually produced in China. Working and materials are better than those who blow on Taobao. The bears can be extended to the pump of high -power pumps, built -in 10A fuse, workmanship is okay, stronger than unlicensed goods. Essence
Due to the small volume of the car charging, the size of the six points is larger, and this kind of box packaging is first seen.
Silvercrest car tri -in -one assignor provides you with the possibility of operating multiple devices with a car charging plug on the car. You can also connect an additional USB device to the integrated USB charging interface. The total load capacity of a motor vehicle three -assignor is 10A. Make sure that the amount of current consumption of all connected loads does not exceed this value, and the real object with the packaging is as shown in the figure below, with a total weight of 153.1 grams.
The front of the box is as shown below.
The back of the box is as shown below.
The side of the box.
There are so many things for disassembling, two small instructions plus one -third of the car charging.
After going to the plastic bag outside, the real thing is as shown below.
Look at it from another angle.
If the motor vehicle three -pointer is plugged in the power supply, the work indicator is not on, and the ignition device of the vehicle may be turned on first.
Through the hinge -type car charging plug, you can adjust the car trident to about 90 degrees according to your wishes. The black protection cover above is a red 10A fuse. The power supply, but the operation indicator LED is not bright, then there may be problems with the fuse and must be replaced.
The details on the back label are as shown below. The cigaretteer input 12V/24V 10A output is also 12 24V 10A maximum 32V 10A. There are four screws on this side. After unscrupulous, you can disassemble the shell.
After the shell is decomposed, the real thing is as shown below.
There is actually not much technical content.
This is the fuse, using a small circuit board.
The internal 5VUSB board, the bear measurement supports the current output of 2.1A, supports the USB 1.5A charging protocol.
The real object on the back of the back is as shown below.
On the other side of the circuit board, there are small characters of SDC8531-2.1A on the circuit board, and the power is not deficient.
The connection line uses thick copper threads.
The cigarette lighter is also directly welded to the contacts.
After the disassembly, the internal work is good or not, everyone has the final say, is it a good thing? Let''s take a look at it. If you look at it, you will be clear at a glance. When the other house is all beautiful pictures, the bear still insists on taking pictures and disassembling themselves. To reflect the physical object of the product, express the details of this product through the picture. I hope you can easily understand this product through the picture in the introduction of the little bear''s product and buy your favorite baby.Because the bear most sells inventory products, it is just a porter of goods. It is inevitable that there will be problems with quality or color. If you receive a problem with the goods, you can directly contact the bear. The bear will immediately solve it.