번역 8 뼈 홈 장대 큰 우산 구멍 세트 케이스
원문 8骨槽长杆伞大孔套筒
번역 8 뼈 홈 장대 작은 우산 구멍 세트 케이스
원문 8骨槽长杆伞小孔套筒
번역 16 뼈 홈 장대 큰 우산 구멍 세트 케이스
원문 16骨槽长杆伞大孔套筒
번역 16 뼈 홈 휠너트 + 중급 + 상단 슬롯
원문 16骨槽套筒+中盘+顶槽
번역 16 뼈 홈 휠너트 + 중급 + 상단 슬롯 + 포장
원문 16骨槽套筒+中盘+顶槽+套管
번역 우산 탑 캡 수평 1 개
원문 伞顶套帽平1个
번역 우산 탑 캡 【 뾰족한 1+ 플랫헤드 1】
원문 伞顶套帽【尖头1+平头1】
번역 우산 탑 캡 뾰족한 1 개
원문 伞顶套帽尖头1个
번역 10mm 두꺼운 막대 최고 사용 의 스위치 활 조각 1
원문 10mm粗杆上用的开关弓片1
번역 우산 탑 부분의 【 문콕 방지 가드 】X2 줄
원문 伞顶部的【防撞条】X2条
번역 8K 골프우산 의 위에 카드슬롯 X1
원문 8K高尔夫伞上卡槽X1
번역 8K 골프우산 중급 슬롯 X1
원문 8K高尔夫伞中盘槽X1
번역 8K 골프우산 구입 휠너트 X1
원문 8K高尔夫伞套筒开关X1
번역 8K 골프우산 구입 스위치 버튼 X1
원문 8K高尔夫伞下盘开关按钮X1
번역 스테인리스 철선 4 조항 10 센티미터 ) 별도로 구매
원문 不锈钢铁丝4条各10厘米)另购
번역 16 뼈 홈 - 우산 탑 카드슬롯 X1
원문 16骨槽-伞顶卡槽X1
번역 10 밀리미터 잭 갈고리 검은 손 핸들 1
원문 10毫米插孔弯勾黑手柄1
번역 14-15 밀리미터 잭 갈고리 검은 손 핸들 1
원문 14-15毫米插孔弯勾黑手柄1
번역 10 밀리미터 잭 직진 검은 손 핸들 1
원문 10毫米插孔直条黑手柄1
번역 14-15 밀리미터 잭 직진 아치형 커브드 조이스틱 1
원문 14-15毫米插孔直弧形手柄1
번역 신축성 문콕 방지 가드 1 개
원문 弹性防撞条1个
Accessories material: high-strength ABS resin plastic material.
installation method:
Method A:
1: First pull out the handle at the bottom of the original umbrella pole(Usually there is glue inside, you can use a hair dryer to blow the handle and remove it, or just knock it out and replace it with a new one.)
Two: After the handle is unplugged, there is a button switch on it, shake it out and pull it out.
Three: Remove the iron wire on the old sleeve, unload and replace with a new one,
Four: This step will be more difficult. Someone’s help is needed. Push up the new sleeve, fix it in one position, and find a pliers similar to the picture above to fix it, and don’t deform the rod. Then another person fixed the wire to the sleeve(The direction should be consistent with the top and bottom, and should be aligned with the original protrusion of the “button”, otherwise it will not be able to be stowed away.
Method B:
Look at the picture below, pull out the hat on the top of the umbrella, remove the umbrella cloth, look at the picture below, there is a nail on the top of the umbrella, pull out the fixed nail, after pulling out the nail, the overall middle umbrella pole can be pulled out and pulled out After that, there is a plastic sleeve at the top of the umbrella. Take out the plastic sleeve first. At this time, you can install the sleeve. Be careful not to reverse the direction, otherwise it cannot be used. After installing the sleeve, re-fix the original umbrella pole and insert it back. Pay attention to it. Take out the original one.【Plastic cover】To plug it back in, and then pull the umbrella downwards, the spring inside will be automatically stressed, retract the umbrella, fix the umbrella pole in position, and the switch button also fix the position. At this time, the umbrella spring will automatically reset. Pay attention to the position of the umbrella top, use the original nails, fix it in the original position, if the position changes, pay attention to fix it. Try it first when you are done, and there is no problem. If the nails are loose after fixing, please use AB glue to fix the inner holes and poles of the nails on the top of the umbrella. Be careful not to get the umbrella stand and notches. Install the umbrella cloth after curing.
Warm away(Show:
Free shipping: Free shipping when you get it. Free shipping does not include: Hong Kong, Macao, Taiwan, Xinjiang, Tibet and overseas and other remote areas.
Different brands of umbrellas have different specifications, so you must measure them accurately by yourself.(After the free shipping activity, the original shipping fee will be deducted additionally),
It is recommended to use professional calipers to measure accurately,
If you need other folding umbrellas, please consult separately.
When installing, pay attention to fix it with a tool, or find someone to help hold it.
If there is a slight mismatch between the position of the original switch after installation, you can find a way to pull out a nail on the top of the umbrella top to fix it, and then fix it again after recalibration.
Use similar pliers to fix the umbrella sleeve, and another person fixes the iron wire. When installing, pay attention not to damage the umbrella.