Do you want to get a bright bike light to ride at night ?Do you want to warn other cars or riders during cycling at night ?Do you want a cycling odometer to achieve your fitness goals ?Do you want a loud bike bell to make others be warning ?Did your handlebar is not enough spare for all of the gadgets?
NEWBOLER 3 in 1 cycling set is your best choice.
Features
800 Lumens Bike headlight gives you awesome visibility and keep safe distance in the dark. Bike speedometer with accurate tracking on speed and distance helps you to get more fun of your cycling trip or easily achieve your fitness goals. 120dB speaker provide a clear warning for passers -by riders and cars.Please enjoy cycling with this wonderful gadget in the anytime to feel your speed!
Specifications
Name: NEWBOLER Bike Computer Horn LightModel: BK-1920Headlight brightness: 800 lumensLighting mode: High/Low/FlashEffective range: 200mElectronic horn: About 120 dB Lamp Light working time: 5hrs/10hrsComputer working time: 3000hrsRechargeable Battery: 4000mAhCharging mode: USB charging Recharge time: 4hrsSensor battery: CR2032Sensor working time: 12months, 1hr/dayWaterproof: IP65Weight: about 145g Size: about 110*40* 35mmColor: Red / Blue / Green / Black
Power Source
Built-in 4000mAh high quality rechargeable lithium battery, and smart chip to get a better performance as multi function accessories.
Turn on/Turn off/Standby mode
Turn on: Long press Power button after 3 seconds, bike light and odometer will turn on at the same time. Turn off: Long press Power button after 3 seconds at any status, bike light and odometer will turn off and the screen does not display .Standby mode: After turn on, the screen will turn into standby mode when there is no any movement after 4 minutes, only clock and battery power will be displayed.
Bike computer
Bike speedometer with accurate tracking on speed and distance helps you to get more fun of your cycling trip or easily achieve your fitness goals. 12 FUNCTIONS BIKE COMPUTER: top/current/average Speed, distance, lighting, LCD back light, clock, time, calorie, auto turn off/data storage, power saving etc;
Memory function
When the battery is low, please charge it in time. If the battery is completely exhausted, it will cause all the data to be completely lost. The factory mode will be restored after recharging.Trip Distantance (DST): Please long press Power button for 3 seconds to clear DST, AVS, MXS, TM and CAL value to zero. The bike light and computer will also be turn off.All data clear: Please long press "SET" and "MODE" button for 10 seconds to clear all of the data. How to reset the circumference, weight, clock: Keep Press MODE key and SET key for 5 seconds at the same time, the host enters the setting state.
Connection
Bike odometer sensor connect with magnetic by wireless, bike bell connect body by wiring .The working principle of wireless versionwireless distance ≤ 70 cm/27.55 inchdistance between magnet and launcher should be 3 mm or so
Bright back light
2.1’ big screen LCD display with sustained backlight, allows you to read the digital clearly in the deep dark night or in the long tunnel.Back light: it depens on the clock setting, the backlight will turn on 15 seconds during 18 :00-06:00 when pressing any keys.
Bike LED light
800 Lumens Bike headlight gives you awesome visibility and keep safe distance in the dark.Wired control or Button control, press button "LED" to change the model or press the turn on button on the body to change the model. There are 4 modes of brightness.(1)100% brightness for 1 Led;(2)100% brightness for 2 Led it will turn to 60% brightness if there is no movement after 3 minutes;(3)60% brightness for 2 Led;(4 ) 2 Led flash, 2 Led closed.
Reasonable Security Ray
Compared with other bike light, this bike headlight features with anti-glare design. It is bright for the night riders and it won’t blind drivers, increasing safety for city riders and commuters who find themselves caught in the dark.
Spotlight / Floodlight
the rang of spotlight make the bright more longer, the floodlight make the bright more wider. to make sure you will have a clear vision at night.Doule T6 LED800 lumen headlight with 3 modes(bright light; weak light; flash;), super bright, gives you awesome visibility and keep safe distance in the dark.
Bike Bell
120dB speaker provide a clear warning for passers-by riders and cars.Please enjoy cycling with this wonderful gadget in the anytime to feel your speed!Wired control. There are 5 kinds of sound mode. 120dB. Long press button "SPK" for 8 seconds to select the sound mode that you wanted. Suitable for all kinds of users.
Excellent waterproof and dustproof performance
Keep bright even sudden rain during cycling, do not worry it will be ruined during bad weather.
Long battery endurance, low consumption
Super Long Battery Duration: 4000mAh built-in rechargeable Li-ion battery and Low energy technology together bring you up to 3000 hours working time (headlight off ,only odometer work).it offers 6/12 working hours when you turn on the head light . USB charging Please note, it can not be charged by computer USB Port, only Mobile phone charger and Power Bank charger.Or it will continuous restart.
Bike computer inspection method
Method: Insert the computer to base. Then one hand holds launcher, one hand magnet. Approach the magnet to launcher and move it up and down. It is normal if there is speed display.(as the picture)
How to install the magnet and launcher
Wireless bike computer Wireless launcher needs a 2032 button cell. Fix the magnet with screws. Magnet can be aligned with the upper or lower of the launcher. Distance should be 3 mm or so.
Configuration
(1) Main Unit( 2) Bracket( 3) Spoke Magnet( 4) Installation Kit( 5) Speed ??Sensor( 6) Lighting And Sound Extension Controller( 7) Extension Controller Fixed Strap( 8) Zip Ties( 9) USB Charging Cable (10) Central bracket (Optional)(11) Bike Tail light (Optional)
Setting for odometer
Keep Press MODE key and SET key for 5 seconds at the same time, the host enters the setting state, when setting, away from the display and other electronic products, it may be interfered, do not turn the wheel when setting, when the motion signal is received, the setting will automatically exit. Press the power key to exit the setting when the setting is complete.
Details Setting
[1]Enter the tire perimeter setting, press the MODE key to set the value from left to right, and press the SET key to change the value. A total of four values ??need to be set in millimeters.[2]Enter the metric /imperial setting, press SET to switch between metric/imperial units, and press MODE to confirm.[3]Weight setting, press the SET key to set the value from left to right, the unit is KG, press the MODE key to confirm .[4]Clock setting: press the set key to set the value, press the MODE key to switch the next bit,[5]Reserve the location of the setting, please ignore this setting[6]When the settings are complete, press the power key to exit the settings
Tyre size correspondence table
Important Tips
For possible reading inaccuracies, customers should know the following information 1. the distance between monitor and sensor should below 80 cm 2. the distance between sensor and magnetic should below 3 mm 3. In order to enhance anti-interference, we used ID coding technology in the design. When the battery is just installed, the speed sensor needs to work continuously for 1 minute to recognize the new sensor.Please refer to the video and test for one minute, then check if the speed sensor is working properly 4. The wrong installation of the speed sensor will also cause 0 display. please refer to the picture below to make sure the installation is right.By the way, this bicycle computer is a wireless product, and the electromagnetic waves of the environment will affect its normal operation.When using it, we should avoid the electrical equipment at work: household appliances, high-voltage wires, transformers, high-voltage cables, charging stations, elevators and other electrical equipment at work (code table speed display 0 when interfered by them)5.The Data Sensor consists of a receiver and a magnet. To accurately measure the data, the sensor must be fixed firmly. The receiver should be aligned with the magnet at the same level.
Q & A
07.17.2020, Customer A suggested a tire circumference comparison table.[A]:it had been offered at the bottom of the description. 07.25.2020, Customer B said the tail light did not work.[A]: There is a piece of paper in the middle of the battery in the taillight, which needs to be removed to light up.
07.30.2020, Customer C, there is no data at all, the computer can not find the sensor.[A]:it is suggested the disctance between the sensor and computer should be below 100cm .The sensor can be installed on the front fork , and the top of the front fork, it will be connected in good condition. 08.05.2020, Customer D, the speed turn to 99km/h sometimes. [A]:The installation is not correct. we suggested reboot the computer, then set the correct tire circumference. and make sure that the magnet is aligned with the center of the sensor, please see the picture below. If the magnet is aligned with the corner of the sensor, the magnet attraction is not accurate enough, and it is prone to abnormal speed.