Honda CB500F CB500X CBR500R modified handle switch assembly, suitable for 14-19 large trade models, left hand switch assembly, with double flash, overtaking lights, the key is the turn signal The position has been restored to the position of most models, and the owner’s own CB500F has been modified and used for nearly three years.
Because I own several cars, I often switch to different bikes. I don’t know why Honda designed it like this. I often make mistakes during cycling. I went to press the turn signal to sound the horn, and I was shocked. I couldn’t bear it and finally decided to modify it. I chose from the left and the right. I finally found this Honda original handlebar switch, but since it is not dedicated for CB500F, the plug needs to be modified and the internal wiring needs to be switched. Change, lengthen the line, after research, finally perfect modification.
My 17-year CB500F modified this switch after adding double flash, unexpectedly there is an extra function, that is, after the double flash is turned on, the double flash is removed after the key is removed. The flashing light is still on, so it is convenient to pull the key to open the back seat or open the tail box during an emergency stop. At this time, if the double flash switch is turned off and the electric door lock is opened without inserting the key, it is useless to press the double flash switch again. The flashing light will not turn on, avoiding being turned on by someone with idle hands. (Some 19 cars also have this function. Some riders reported that they did not have this function. It may be that the function of the flasher has changed in different batches. This function is not guaranteed.)
At the request of the majority of riders, addedSteering priority function, When the double flash is on, the turn signal will automatically switch to the flashing of the turn signal in the corresponding direction.(If the steering priority function is not required, the option of no steering priority can be selected. If there is no steering priority, after turning on the double flash switch, the turn signal switch becomes invalid.)
There is a special note about overtaking lights. The cb500 series models are all permanent lights abroad.(Almost all other brands of big trade cars are always bright lights)The position of the headlight switch on the right hand is double flash in the foreign version, so the circuit of this car was originally designed as a permanent light. The domestic version of the big trade changed the position of the double flash switch to the headlight switch, and the 16 models and later models They are all LED headlights, which are powered by a relay, and the headlight switch controls a relay to supply power.After the main switch of the headlight circuit is turned off, the relay is also out of power. Even if the left-hand switch has a passing light, it is controlled by the right-hand main headlight switch. Therefore, for the 16 models and later models, the LED headlights must be turned on to use the passing lights. Right hand switch. Of course, you can also keep the right-hand switch on to keep the low-beam permanent light, and you can use the overtaking light at any time.(There is no headlight switch on the right hand of foreign models. It is a double flash switch and a permanent light.).
Add a lighted version of the switch, (switch button icon with backlight) a set of left and right hand replacement, can achieve the function of overtaking lights without turning on the headlights, (not When turning on the headlights, press the overtaking light button, the far and near lights will be on at the same time, after turning on the headlight switch, the near light will be on, press the overtaking light switch to turn on the high beam) In addition, the right hand switch also reserves a spotlight connector for installation. The lamp does not need to install an external switch, it is beautiful and coordinated, and the integrity is better.(The graphic description is at the bottom of the page)
This switch is modified from the domestic Wuyang Honda original switch.(Not exclusively for CB500 series, original switches for other domestic Honda models)The original quality of the joint venture capital, not the ordinary domestic matching switch, the hand feel does not lose to the original car switch made in Thailand, the plug is also the same as the original, non-destructive modification, and the plug has a dust cover.
For CBR500R CB500X, you don’t need to disassemble the car shell during installation. When the handlebar is turned to the right, you can see the plug next to the carbon canister. Unplug the carbon tube to remove the plug. For CB500F, you need to remove the air deflector on the left side of the fuel tank. The plug can be plugged and unplugged, and the three hexagon sockets can be removed with the vehicle tool, which is also very simple.
This switch assembly is only applicable to large commercial vehicles, and foreign models cannot be used normally. 16 previous halogen headlights and old models are different because of the different headlight lines. Please specify if you take the photo.
This switch isThe domestic Wuyang Honda Mengzhi 190 original switch assembly is restructured. Friends with high requirements may think that there is no original Thai product. The pictures are taken in kind. You can go to the Wuyang Honda store to see the actual car and compare it by yourself. The wiring and double flash module are also modified by the shop owner. There is a double flash module at the position of the wiring harness after 30 cm, which is cautious for customers with high aesthetic requirements. In addition, the wiring and internal wiring of this switch, fixing pins, etc. all need to be changed., It takes three hours to change a set of switches. When the owner is not busy, you can probably change three sets a day. There is no guarantee that it will be shipped on the same day. Please understand.
Finally, I will nag a bit. I am often asked by riders if this switch is waterproof? Regarding this question, I can only answer this way. The switch is rain-proof, but not water-soaking and high-pressure water gun washing. The same is true for the original switch. The three drainage holes at the bottom of the original switch are the same for this switch. After the water is sprayed, the water comes from the bottom. The drain hole is eliminated. Regarding the car wash, I specially showed you a screenshot of the manual. It is clearly stated in the manual that only low-pressure hoses can be used to wash the car. Avoid water flushing into electrical components. High-pressure water guns are forbidden to wash. High-pressure water guns will damage electrical components. Motorcycles are different from automobiles. There are almost no external electrical parts and wiring. Many electrical parts and wiring of motorcycles are exposed. It is necessary to save trouble to wash the car in the car wash. Please be sure to emphasize to the car wash workers that electrical parts cannot be washed. Switches are also electrical. The parts cannot be flushed with a high-pressure water gun.
![](https://img.alicdn.com/imgextra/i3/23515000/O1CN01O8he9x1mo2vrSGsA8_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i2/23515000/O1CN01JJIZRL1mo2vmg2Lf5_!!23515000.jpg)
Other models support customization. The shape, internal structure, plug shape and wiring harness photos of the original car switch are required. Welcome to discuss the modification plan with me.
![](https://img.alicdn.com/imgextra/i4/23515000/O1CN01m9LZK21mo2rilCY8d_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i1/23515000/O1CN019EIPpr1mo2rhy2iFZ_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i3/23515000/O1CN01r2Syfe1mo2rj4dgRt_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i3/23515000/O1CN01xcWvgR1mo2rl6N96b_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i4/23515000/O1CN01AUt5Ny1mo2rhqyROz_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i2/23515000/O1CN01t5dsBU1mo2rhqwhM5_!!23515000.jpg)
Plugs are sometimes used with imported switches to change the brand new dust cover that was removed when other models are changed. Not all of them are available. When there is no original dust cover, it is matched with the owner’s self-made dust cover. The picture below shows the shop owner’s self-made dust cover, which is shipped randomly.
![](https://img.alicdn.com/imgextra/i2/23515000/O1CN01gfbn2y1mo2ve1sWLr_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i3/23515000/O1CN01nKRQJ41mo2vDZ3hIE_!!23515000.jpg)
The modified positioning pin will not rotate loosely after the handle is installed.
![](https://img.alicdn.com/imgextra/i1/23515000/O1CN01HIzfvD1mo2st1uTTX_!!23515000.jpg)
The internal logo is clear and the workmanship is exquisite. The three drainage holes at the bottom are the same as the original switch, which can drain water from the drainage holes after raining.
![](https://img.alicdn.com/imgextra/i2/23515000/O1CN01Zl8G8d1mo2spVjwIj_!!23515000.jpg)
The double flash steering priority module is fully sealed and filled with glue to prevent hidden dangers of water ingress.
![](https://img.alicdn.com/imgextra/i3/23515000/O1CN01jaRTyF1mo2ss8AOHq_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i3/23515000/O1CN013gIO2N1mo2somSN8t_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i1/23515000/O1CN01NFyFIn1mo2rjkhzpC_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i3/23515000/O1CN01v4fAuW1mo2rj5UaaL_!!23515000.jpg)
The picture below shows the real shots of 19 CB500X installations.![](https://img.alicdn.com/imgextra/i3/23515000/O1CN01o13IG31mo2somRIfU_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i3/23515000/O1CN01xsZKvA1mo2sqtMP8U_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i3/23515000/O1CN01KdrmSZ1mo2vM00wtJ_!!23515000.jpg)
19 models of CBR500 loading real map
![](https://img.alicdn.com/imgextra/i4/23515000/O1CN01f4eSGc1mo2uF7Qg9V_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i2/23515000/O1CN01PAlGS31mo2uDgNXRU_!!23515000.jpg)
The picture below shows the hand switch kit with lights. This kit can be replaced with one set of left and right hands. Overtaking lights can be used when the headlights are not turned on. It is the same as most domestic cars, but only the left hand switch needs to be replaced. Turn on the headlight switch on the right hand to use. This switch is integrated with the far and near beam switch. When the low beam is pressed down, it will automatically reset. In addition to the double flash, steering priority is available. This switch is sold as a set of left and right hand, not sold separately.
![](https://img.alicdn.com/imgextra/i3/23515000/O1CN01OUqYmO1mo2vVmc1yN_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i2/23515000/O1CN01PYjsav1mo2vTKRHgZ_!!23515000.jpg)
The right-hand switch headlights have two gears. The first gear turns on the headlights, and the second gear reserves a plug that can be directly connected to the spotlight. There is no need to connect a bunch of wiring harnesses and external switches to install the spotlight.![](https://img.alicdn.com/imgextra/i2/23515000/O1CN015ajq5r1mo2vYCUFVh_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i3/23515000/O1CN01h7HnIc1mo2vQVJpMf_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i3/23515000/O1CN010D6QBo1mo2vXTh27X_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i2/23515000/O1CN01lZ9VH21mo2vTiM5C0_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i1/23515000/O1CN01QUqn1f1mo2vXTgpe2_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i3/23515000/O1CN01ytMGIP1mo2vglfTby_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i1/23515000/O1CN01IOSOUh1mo2vdf6KsX_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i1/23515000/O1CN01oATTIk1mo2viQNrBz_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i3/23515000/O1CN01UhlFT91mo2vdf6CYl_!!23515000.jpg)
A line is added between the left and right switches to control the passing lights, which can be achieved without turning on the headlights, and pressing the passing lights to directly light the headlights. In addition, there is a separate two-wire plug, which is controlled by the second gear of the right-hand switch headlight switch. One input and one output two wires can control spotlights or other equipment you want to control. It is equipped with a pair of plugs and plugs. A set of chip terminals. It can also help you change to this plug to directly output the positive and negative power supply, and directly connect to the electrical equipment.![](https://img.alicdn.com/imgextra/i3/23515000/O1CN01kymgSF1mo2vdC5kCp_!!23515000.jpg)
![](https://img.alicdn.com/imgextra/i4/23515000/O1CN010CRCT91mo2vVdFY0E_!!23515000.jpg)