Multi-function tachometer, input NPN pulse signal, output current 4-20MA, 2 output forms, relay output, current output.
Speedometer size: 48*96*75MM (Width * length * depth), Hole size: 45*92MM, power supply voltage 220V, output DC12V for sensor
Introduction of OUT2 analog output: there are 3 types(01,08,09)output method
01 Introduction to the output mode: directly output the voltage, set how much to output.
for example:Setting parameters(LC-10v)(This parameter is the speed corresponding to the 10V output), if 20MA is set to 3000 revolutions, the OUT2 setting value is 1000 revolutions,
08 The output mode is PID regulation output. This is mainly the function of constant speed. It is used with the inverter to automatically adjust the speed. If OUT2 is set to 1000 rpm, then the output of the inverter can be stabilized at 1000 by adjusting the output voltage. The output speed is accurate, not affected by the load size, and can automatically adjust the constant speed.
09 Output mode: It is a transmission output, which is converted into a current output according to the detected speed.
Product display:
![](https://img.alicdn.com/imgextra/i2/1769371563/TB2XgLOkgDD8KJjy0FdXXcjvXXa_!!1769371563.jpg)
Speedometer + Hall switch:
![](https://img.alicdn.com/imgextra/i1/1769371563/TB2lAqHkhTI8KJjSspiXXbM4FXa_!!1769371563.jpg)
Speedometer + proximity switch:
![](https://img.alicdn.com/imgextra/i1/1769371563/TB2fXDYknnI8KJjy0FfXXcdoVXa_!!1769371563.jpg)
Speedometer: Encoder:
![](https://img.alicdn.com/imgextra/i1/1769371563/TB2V1vlkhrI8KJjy0FpXXb5hVXa_!!1769371563.jpg)