This high-voltage module is made using the principle of Tesla coil, which outputs high-voltage pulse high-voltage current, small size, high efficiency, and simple peripheral circuit(Just connect the switch and battery)The discharge intensity is violent.
Input voltage: DC 3V-6V
Input current: 2A-5A
High voltage type: pulse current type
Output voltage: about 200,000 volts(Please pay attention to safety when using)
High voltage two-pole discharge distance: 10mm-20mm
Length of output high voltage line: about 100mm
Input power cord length: about 100mm(The red wire is positive)
Dimensions:Φ24*64mm
Regarding the power supply: you can use a single 3.7V lithium battery or two in series, such as 18650 batteries, idle mobile phone batteries(To remove the protection board, the recommended capacity is above 2000mAh)Or nickel-cadmium/nickel-metal hydride battery packs, 4V or 6V lead-acid batteries, etc.
This module is a finished module of high-voltage inverter transformer/booster for scientific small production. After inputting DC3V-7.2V voltage at the input end, you can get a DC high voltage of about 200,000 volts at the output end.(About 1-2 cm arc), Note that there is no ignition function
wiring:The red wire is the positive pole of the power supply. The output is 2 high temperature and high pressure resistant silicone wires
.........