The main function
Fully innovative LED flash technology.
More close to natural light using high-quality LED lights
There are eight levels of brightness adjustment
It is a higher need for photography under innovative functions
The left and right flash function makes the object appear in the third dimension
Suitable for macro photography, scientific research.medical and personal hobby photography.
Instructions and precautions:
1. This product conforms to the designated professional camera, and others are forbidden.
2. Please do not try to separate either side of the product by yourself to avoid short circuit or burnout; if you find that the shell is damaged or there is a problem with the flash, please go to the designated organization to get the warranty.
3. Do not flash in your promotion.
4. If there is no flash used for more than one time(More than two weeks), Please remove all batteries to avoid battery leakage.
5. When replacing the battery, the entire battery can be replaced at one time.
6. The flash has no waterproof and windproof function, so please keep the flash dry.
LED ring flash device
It is additionally equipped with 40.5mm, 52mm, 55mm, 58mm, 62mm, 72mm, 77mm, eight different adapter rings, and color temperature rings.
1. Select and install the corresponding adapter ring according to the diameter of the lens.
Note: Avoid using too much force to make it difficult to remove the connection between the adapter ring and the lens
2. Press the ring light lock and place it on the lens with the adapter ring, release the lock button, and the ring light has been locked on the adapter ring at this time
Note: After the installation of the digest flashlight driver is completed, prevent the lock from being completely broken.
Install the battery
A. Swipe in the direction indicated by the arrow>Battery compartment cover>Open it.
B. Install the battery in the direction of the arrow, making sure that the battery contacts are correct.
C. Swipe in the direction indicated by the arrow>Battery compartment cover>Open it.
Note: Please use 4 standard size AA batteries and do not use damaged batteries. Prevent the occurrence of short circuits.
Installation and uninstallation of flash control body
Rotate in the direction indicated by the arrowTo the highest level.
B. FlashPush into the camera hot shoe completely.
C. Rotate in the direction indicated by the arrowTo light.
If you remove the flash, release it, Take it out of the hot shoe of the camera.
Notice:If the flash of the camera pops out of the cabin, please close the camera cabin and flash first, and then install the flash product on the camera.
Possible problems and solutions during use
1. When long exposure or overexposure, the solution is to check whether the aircraft, aperture, ISO settings, camera are too close to the limit or flash exposure compensation, exposure bracketing and other related settings are correct.
2. The dark corners of the photo are set by the camera to be wide-angle. The solution adjusts the focal length of the camera to be less than or more than 50cm.
3 Flash not flash:
A. The battery is dead, please replace it with a new one(Recommend N1H1 battery)
B. Reverse the battery electrodes and replace the battery again.
C. The flash or metal camera is dirty, reinstall it and clean it with a fiber cloth. If there is still an abnormality, please replace it with a new battery pack and try again.
technical parameter
Flash GN: 15
Effective flash range: 5cm-1.5m
Color temperature: 6800k
Exposure time: 1/100 seconds
Power supply: 4pcs AA batteries
Weight: 205g