Domestic high-quality lens hood, screw mouth wide-angle hollow metal lens hood
The second-generation upgrade model can use the original lens cover, and various filters can be added in the hood.
Specification: 58mm
Main features: exquisite workmanship, you can use the original lens cap, and use the lens hood
canAnInstall UV mirror or other filtersMirror, the inner layer is treated with a special matt coating,
may haveEffectively control reflections.
Fuji X-E1 X-E2 X-PRO1 with
The XF18-55mm lens is very matched and uses no vignetting.
Fuji xf 14mm F2.8R/
Fuji XC16-50mmF3.5-5.6 OIS lens,Also suitable for no vignetting
Hood parameters:
Material: Aluminum alloy material
Height: 14mm(With thread)
Front port diameter: 72mm
Suitable for: 58mm wide-angle lens or fixed focus lens
Lens hoods are widely used in backlight photography, generally speaking, to avoid glare. However, if the light source is close, glare may still occur. At this time, you can use your hand to block the hood on the side where the light source is located. Whether the glare is eliminated, you must observe it clearly in the viewfinder.
![](https://img.alicdn.com/imgextra/i3/28013861/TB2XGvpkPnD8KJjSspbXXbbEXXa_!!28013861.jpg)
![](https://img.alicdn.com/imgextra/i3/28013861/TB2HEQKspXXXXaUXXXXXXXXXXXX_!!28013861.jpg)
![](https://img.alicdn.com/imgextra/i4/28013861/TB25jGJspXXXXaoXpXXXXXXXXXX_!!28013861.jpg)
![](https://img.alicdn.com/imgextra/i3/28013861/TB2aCkZnSBjpuFjSsplXXa5MVXa_!!28013861.jpg)
![](https://img.alicdn.com/imgextra/i2/28013861/TB2lA.NspXXXXaoXXXXXXXXXXXX_!!28013861.jpg)
Effect picture before installing the lens:
![](https://img.alicdn.com/imgextra/i3/28013861/TB2_x7SspXXXXXlXXXXXXXXXXXX_!!28013861.jpg)
UV mirror our shop recommends:
![](https://img.alicdn.com/imgextra/i4/28013861/TB2y3UrspXXXXXzXpXXXXXXXXXX_!!28013861.jpg)
1. Tianya ultra-thin XPRO-1D MC-UV sixteen-layer coating, with a light transmittance of more than 99%. Please select this linkhttp://item.taobao.com/item.htm?spm=a1z10.5.w4002-7856437782.30.79Uii1&id=16007012426
2. Tianya ultra-thin MRC MC-UV 18-layer coating, the light transmittance is above 99.4% and the coating is dust-proof and oil-proof. Please choose this linkhttp://item.taobao.com/item.htm?spm=a1z10.5.w4002-7856437782.19.E2TKhB&id=42562246529
The role of the hood:
![](https://img.alicdn.com/imgextra/i3/28013861/TB2yap6qXXXXXX.XXXXXXXXXXXX_!!28013861.png)
![](https://img.alicdn.com/imgextra/imgextra/i4/28013861/TB2bPfVbFXXXXXkXpXXXXXXXXXX-28013861.png?time=1464621561000)
![](https://img.alicdn.com/imgextra/imgextra/i4/28013861/TB2GyTYbFXXXXcFXXXXXXXXXXXX-28013861.png?time=1464621561000)
1.In the backlight, side light or flash photography, it can prevent the entry of non-imaging light and avoid fog.
2.In the forward and sidelight photography, it can prevent the surrounding scattered light from entering the lens.
3.In lighting photography or night photography, it can prevent the surrounding interference light from entering the lens.
4.It can prevent accidental damage to the lens, and it can also prevent fingers from touching the surface of the lens by mistake.
To some extent, it shields the lens from wind, sand, rain and snow. There are many sizes of hoods, and the one that matches the focal length of the lens should be selected. The shorter the focal length of the lens, the larger the angle of view and the shorter the hood. If the hood of a standard lens is used on a wide-angle lens, it will inevitably produce the result that the image can not be imaged around the screen. On the contrary, it cannot play the role of shading. When using a zoom lens, it is best to be equipped with a self-use retractable lens hood.
Lens hoods are widely used in backlight photography, generally speaking, to avoid glare. However, if the light source is close, glare may still occur. At this time, you can use your hand to block the hood on the side where the light source is located. Whether the glare is eliminated, you must observe it clearly in the viewfinder.