Silver type old lens hood, metal screw mount standard fixed focus lens hood
Lens hood length: 20mm without thread
Lens port diameter: /46mm/49mm/52mm/55mm/58mm
(Please leave a message to remark the required caliber model)
【Product specifications】:
1,The diameter of the interface is 46mm, and the height is about20mm(Without thread),Available with 52mm lens cap;
2. The diameter of the interface is 49mm, and the height is about20mm(Without thread),Available with 58mm lens cap;
3.The diameter of the interface is 52mm, and the height is about20mm(Without thread),Available with 58mm lens cap;
4.The diameter of the interface is 55mm,Approximately 20mm in height(Without thread),Available with 58mm lens cap;
5.The diameter of the interface is 58mm, and the height is about20mm(Without thread),Available with 62mm lens cap;
It is suitable for standard fixed-focus lenses such as 35mm/50mm, and the internal matte and threaded treatment can effectively control the reflection.
Lens hoods are widely used in backlight photography, generally speaking, to avoid glare. However, if the light source is close, glare may still occur. At this time, you can use your hand to block the light shield on the side where the light source is located. Whether the glare is eliminated, you must observe it clearly in the viewfinder.
The hood can also protect your beloved lens from scratches and breaks. For example, when you turn the lens around the corner or accidentally fall while holding the lens, if there is no hood protection, then the beloved lens Will get hurt.
![](https://img.alicdn.com/imgextra/i1/28013861/TB2qfBreqAoBKNjSZSyXXaHAVXa_!!28013861.jpg)
![](https://img.alicdn.com/imgextra/i2/28013861/TB2klBhoNWYBuNjy1zkXXXGGpXa_!!28013861.jpg)
![](https://img.alicdn.com/imgextra/i1/28013861/TB2nq5IeA7mBKNjSZFyXXbydFXa_!!28013861.jpg)
Effect after installation:
![](https://img.alicdn.com/imgextra/i1/28013861/TB2.7L0XNUaBuNjt_iGXXXlkFXa_!!28013861.jpg)
![](https://img.alicdn.com/imgextra/i3/28013861/TB28GsEov9TBuNjy1zbXXXpepXa_!!28013861.jpg)
![](https://img.alicdn.com/imgextra/i1/28013861/TB2Mrk8oACWBuNjy0FaXXXUlXXa_!!28013861.jpg)
![](https://img.alicdn.com/imgextra/i1/28013861/TB2r9cJspXXXXcGXpXXXXXXXXXX_!!28013861.png)
![](https://img.alicdn.com/imgextra/i2/28013861/TB2h_ypeRUSMeJjy1zjXXc0dXXa_!!28013861.jpg)
![](https://img.alicdn.com/imgextra/i1/28013861/TB2DcQZspXXXXa0XpXXXXXXXXXX_!!28013861.png)
![](https://img.alicdn.com/imgextra/i4/28013861/TB2tDtqsFXXXXa0XXXXXXXXXXXX_!!28013861.png)
The role of the hood:
1. In the backlight, side light or flash photography, it can prevent the entry of non-imaging light and avoid fog.
2. It can prevent the scattered light from entering the lens when taking photos with forward and side light.
3. In lighting photography or night photography, it can prevent the surrounding interference light from entering the lens.
4. It can prevent accidental damage to the lens, and it can also prevent fingers from touching the surface of the lens by mistake. It can also shield the lens from wind, sand, rain and snow to some extent.
This lens hood can be connected to the UV. The order is to add the UV lens before the lens, and then add the hood, which can be screwed on.