Menon A-S 52mm caliber (luokou) Round standard lens hood
ABS plastic material
![](https://img.alicdn.com/imgextra/i2/21381882/T2Ca9bXgFbXXXXXXXX_!!21381882.jpg)
![](https://img.alicdn.com/imgextra/i2/21381882/T2NcubXadXXXXXXXXX_!!21381882.jpg)
ABS series hoods are precision injection molded from ABS high-strength engineering plastics. It has strong impact resistance and aging resistance. It is suitable for all focal length lenses of more than 90% 135 cameras of all brands.
A-"The following letters indicate in the product code:
S-Standard lens (50mm)
![](https://img.alicdn.com/imgextra/i3/21381882/T2UAd0XfxaXXXXXXXX_!!21381882.jpg)
![](https://img.alicdn.com/imgextra/i2/21381882/T2BAX0XkpaXXXXXXXX_!!21381882.jpg)
![](https://img.alicdn.com/imgextra/i1/21381882/T2lz80XoRaXXXXXXXX_!!21381882.jpg)
Mennon hood is a common photographic accessory set in front of the camera lens. It has a hard plastic texture and has a more delicate workmanship than the old one.
Usable lens
![](https://img.alicdn.com/imgextra/i2/21381882/T2PrFjXk0XXXXXXXXX_!!21381882.jpg)
NIKON Nikon AF 50mm f/1.8D
Lens structure(Piece/group) | 6/5 |
With 35mm(135)Camera angle of format | 46 degrees |
Camera angle using Nikon DX format | 31 degrees 30 minutes |
Minimum f/stop | 22 |
Minimum focusing distance (Macro setting) | 0.45m/1.5ft |
Maximum copy ratio(Macro setting) | 1/6.6 |
Filter size | 52 mm |
Diameter x length(Extension from the lens mount) | 63.5 x 39 mm |
Weight (approximately) | 155 grams |
![](https://img.alicdn.com/imgextra/i4/21381882/T2QrFjXkRXXXXXXXXX_!!21381882.jpg)
NIKON Nikon AF 50mm f/1.4D
Lens structure(Piece/group) | 7/6 |
With 35mm(135)Camera angle of format | 46 degrees |
Camera angle using Nikon DX format | 31 degrees 30 minutes |
Minimum f/stop | 16 |
Minimum focusing distance (Macro setting) | 0.45m/1.5ft |
Maximum copy ratio(Macro setting) | 1/6.8 |
Filter size | 52 mm |
Diameter x length(Extension from the lens mount) | 64.5 x 42.5 mm |
Weight (approximately) | 230 grams |
Product model】:52mm header hood
Scope of application: 50mm lens use
colour: Matte black (Black)
Specification: Inner mouth diameter 52mm spiral type ,
![](https://img.alicdn.com/imgextra/i5/21381882/T2Vt8lXXpaXXXXXXXX_!!21381882.jpg)
NikonAF-S NIKKOR 50mm f/1.4GThe lens cannot be used with this lens hood, please confirm the model of the buyer, do not buy the wrong one, the wrong one cannot be returned or exchanged
It has the following functions:
1. It can prevent the entry of non-imaging light and avoid fog when shooting in backlight, side light or flash photography.
2. It can avoid the surrounding scattered light from entering the lens when taking photos with forward light and side light.
3. In lighting photography or night photography, it can prevent the surrounding interference light from entering the lens.
4. It can prevent accidental damage to the lens, and it can also prevent the finger from touching the surface of the lens by mistake. It can also shield the lens from wind, sand, rain and snow to some extent.
There are many sizes of hoods, the one that matches the focal length of the lens should be selected. The shorter the focal length of the lens, the larger the angle of view and the shorter the hood. If the hood of a standard lens is used on a wide-angle lens, it will inevitably produce the result that the image can not be imaged around the screen. On the contrary, it cannot play the role of shading. When using a zoom lens, it is best to be equipped with a self-use retractable lens hood.
Lens hoods are widely used in backlight photography, generally speaking, to avoid glare. However, if the light source is close, glare may still occur. At this time, you can use your hand to block the hood on the side where the light source is located. Whether the glare is eliminated, you must observe it clearly in the viewfinder.