Some points should be noted when using infrared remote control:
1. The machine itself must be adjusted to accept remote control.
2. Because it is an infrared remote control, the reason is the same as that of a TV remote control, which is linear transmission.
3. The best angle of the remote control is the front of the lens (valid within 10 meters) + if you cannot focus, the remote control will not have a result.
【Scope of application】
EOS M micro single EOS700D 650D 600D 500D 550D 450D 400D 350D 300D 7D 5D II 5DIII 60DWaiting for digital SLR;
Pro1 G9 G7 G6 G5 G3 G2 G1 S1is S70 S60 Pro90IS 300v 300x 3000vQD IXUS jr/Ⅱ/Ⅲ and other Canon models. EOS30V/30/33/50/300 series film SLR cameras; all Canon models with infrared remote control function.
【Instructions for use】
1. Before use, the transparent plastic insulation sheet in the battery compartment should be unplugged.
2. The machine itself should be adjusted to remote control mode(When using door B, adjust to door B and allow infrared reception).
3. Point the remote control at the remote control receiving window of the camera, press the button from the front of the camera, it can control the camera to focus automatically.
4. The best angle of the remote control is the front of the lens + 30 degrees to the right, other angles cannot be guaranteed.
5. Effective distance: up to 10 meters(No barrier). If you are unable to focus, the remote control will not produce results.
Canon SLR remote control how to set the camera to support remote control Set in the drive mode on the SLR machine. The drive mode is set to single shooting, continuous shooting, self shooting, remote shooting, etc., set to remote shooting.
【Graphic analysis】