![](http://img.alicdn.com/imgextra/i3/67750077/O1CN01oNqIqF1CRJDb341Ps_!!67750077.png)
![](http://img.alicdn.com/imgextra/i3/67750077/O1CN01a3lg2U1CRJDXbTonx_!!67750077.png)
![](http://img.alicdn.com/imgextra/i2/67750077/O1CN01tlfzrv1CRJDigJPKP_!!67750077.png)
![](http://img.alicdn.com/imgextra/i4/67750077/O1CN0105tDS51CRJDYG3cBi_!!67750077.png)
CDT-XR is designed as a reference CD transmission. It is based on the traditional basis of CDT and CD XT SIGNATURE models, but combines many new technologies developed by Cyrus in recent years. CDT-XR is located in our iconic semi-wide chassis and is located on the existing CDI and CDT models. It provides substantial performance upgrades. The audience will notice that the noise is significantly reduced, and the improvement of the sharpness and meticulous details through the improvement of major design in many fields, but still retains the unique "sound of Sailex". Transport/servo
A few years ago, Cyrus had a huge funding for developing our own internal CD "servo" mechanism, that is, our "servo evolution". The design principle is to read as much information as possible from the CD -ROM itself, rather than relying on "re -reading" or "correction errors".
Although the data on the CD is indeed stored in "1 and 0", the way to read the data(Use different frequency reflex light)Have similar elements. Therefore, precision engineering can improve performance. When the error correction of the data is required during the second pass, the step -by -motor of the mechanism is required, and the ready -made institution will produce a significant "system noise". Our "Servo-Evolution" system reduces these re-reading and correction of about 20%, which not only produces cleaner data streams, but also has a significant reduction in noise.
Internal power supply
Like all products in the CDT-XR and XR series, the power supply of each circuit has been fully maintained. The power supply is stronger and allows Cyrus engineers to make the Se engine running quietly.
Honesty.
The upgraded components and the "inverse flow" method to reduce the intelligent design circuit that reduce noise picking is obvious in the entire design.
The basic principle is that the power supply starts from the "quiet" part of the circuit and then flows to the "noise" section. Therefore, less noise is "carried" or induced in the power path, thereby limiting noise transmission inside the product. Although this sounds logical, the application of the actual application is very complicated and needs to be considered within the system. Even the geometric alignment of each component has been optimized to promote clean power and music signal streams.
special attention items
A key improvement of CDT-XR is to re-count the timing before digital signals exit the chassis. Although the noise and timing precision have been carefully managed in the entire circuit, this re -timing can ensure the purity of the digital signal connected by the fiber and coaxial shaft.
It is worth noting that although the integrated CD player provides extraordinary value, although the CDI-XR is very close to the ideal under the circumstances of reasonable allowance, the existence of the DAC circuit in the same situation means that the sound will never be "" like "" like the image is like "like" like an image is like an image. Special transportation tools are as clean. Coupled with the integration and front amplifiers in the XR series, both have the original Gen 2 QXR DAC, which means that the CDT-XR is the choice of the connoisseur when used with the complete Cyrus system.
Specification
Cyrus CDT-XR specification
Digital CD transmission
Servo evolution technology
Fiber and coaxial output
PSU-XR upgrade port
Users can upgrade the device
Including IR14 remote control
size(High x wide x deep)- 73 x 215 x 360 mm
Weight -3.7kg