| size(Without gas tank) | weight(Without gas tank) | interface | Ignition method | brightness(Candle) | Maximum air consumption | Reduced power | Gas type | Use occasion |
Large steam lamp | 20*φ15cm | 800 grams | Screw mouth | Automatic ignition | 300cp | 60g/h | 187W | Direct use of flat tanks / optional adapters can be used for long tanks / optional poles can be used for gas tanks and steel cylinders | Self-driving tour and other campsites or large tent canopy use |
When the brightness is increased, the exposure time is a bit long because the brightness is too high, and the color of the photo is deviated and blurry![](https://img.alicdn.com/imgextra/i3/49123587/T2Y.C3XyNXXXXXXXXX-49123587.jpg)
It was taken when the brightness of the steam lamp was adjusted lower, which was much clearer than the previous high-brightness![](https://img.alicdn.com/imgextra/i1/49123587/T2otC4XqpXXXXXXXXX-49123587.jpg)
The picture below is an upgraded version sold now(2 horizontal bars are added outside the glass cover)
The lamp holder adopts the design of elbow tube inverted chandelier, which preheats the gas to a certain extent, so that the liquefied gas
More fully vaporized, enhance the use effect at low temperature![//www30.babidou.com/pic/2008/6/23/qd68825578/Stove/lantern/2013/201301181728501090.jpg](https://img.alicdn.com/imgextra/i4/49123587/T2t2K3XqNaXXXXXXXX-49123587.jpg)
The picture below shows the use effect of the gas tank pole![](https://img.alicdn.com/imgextra/i1/49123587/TB2HOdDkpXXXXc9XXXXXXXXXXXX_!!49123587.jpg)
The top cover is directly stuck on the three columns, it is very convenient to open and close the top cover to replace the light yarn
The enamel top cover is thick and firm. This steam lamp has high brightness and high temperature during combustion. The ordinary top cover cannot be used.
Dedicated 2600KPa pressure valve suitable for domestic gas tanks
1.Copper valve marked 2600KPa refers to the suitable pressure range of this valve, and 2600KPa is suitableChina area
Commonly used outdoor flat gas tanks(Butane gas tank)Pressure range.
Our factory is a professional outdoor gas lamp factory, mainly for European and American outdoor big brand OEM production,ProduceProduct specifications
Very comprehensive,So there will be valves for gas recipes in different countries.
However, many auto lamp manufacturers that dominate the domestic auto lamp market now have a single valve hitting the world, so there is no need to considerliquefaction
gasmatch,There is no need to print on the valve to adapt to the pressure range. There are even a lot of cost savingsUse zincalloy
Making valves,Long-term security is not guaranteed.
These factories, no matter the product design, quality standards, or actual performance, can’t be used by developed countries.profession
Brand foundry,It can only be sold domestically or OEM for some domestic brands. So from the label of a valve,You can see
Make a difference.
2. The sealing rubber ring used in this paragraph is very thick and has an inclined slope angle. The advantage is that the sealing is better.
moreDurable and not easy to break, and the tolerance of the gas tank is more adaptable. If you are interested, you can compare other steam lamps
(includeSome imported steam lamps), They all use ordinary aprons.
![//www30.babidou.com/pic/2008/6/23/qd68825578/Stove/lantern/20130119111631746.jpg](https://img.alicdn.com/imgextra/i3/49123587/T2WGm3XuXaXXXXXXXX-49123587.jpg)
Please do not touch the lamp yarn with your hands after being carbonized. If it is broken by vibration, you need to replace the lamp yarn with a new one.Note: The new lamp yarn needs to be carbonized before use. The specific method is shown in the figure below.