Product name】 Waterproof bicycle computer model SD-548
【Brand】 Shundong/SUNDING
【Material】 Engineering plastics electronic components
【display】 LCD display
【size】 46mm*45mm*19mm
【weight】 About 100G
【colour】 Black box optional
【Configuration】 Watch body, watch holder (wired with induction probe), induction magnet, cable tie, Chinese manual
15 functions:
Tire circumference setting function
1. Set according to the circumference of the bicycle tire.
Speed ??function:
2. Instantaneous driving speed SPD
3. Maximum driving speed MXS
4. Average driving speed AVS
5. Tips for comparing with average speed▲▼Wheel revolution function
6. Wheel running laps per minute RMileage function(English/Metric switch)
7. Total mileage ODO
8. DST per trip
9. The initial value of total mileage is set. If the battery is replaced, the value before the replacement can be set as the initial value.
Time function
10. Driving timeTM
11. clock(12 hours/24 hours switch)CLKAutomatic cycle display function
12. ODO, DST, MXS, AVS, TM, R, CLK function, one content automatically scrolls every 4 seconds SCAN
Driving data sampling function
13. Real-time data sampling, professional testing, including DST TM AVS MXS
Power saving function
14. If there is no input signal within 30 seconds, it will automatically enter the power saving mode, and only the time will be displayed.
Maintenance reminder function
15. When the total mileage reaches the set maintenance value, the wrench symbol is displayed to remind the bicycle to be maintained.
water-proof
16. Has good waterproof function.
installation tips:
1. Install the meter head base on the handlebar;
2. Insert the AG13 button battery into the battery slot on the back of the meter
3. Initialize the code table data, generally only need to set the tire circumference as a parameter, then it can be used normally;
3. Insert the meter head into the slide groove of the meter head seat;
4. Install the sensor on the front fork, with the sensor head facing the spokes;
5. The induction magnet is installed on the spokes, aligned with the induction head, and the distance is about 5 mm;
6. Fix the cables with nylon cable ties;
7. Check whether the above meter head base, sensor and induction magnet are installed firmly.
8. For more functions, please refer to the manual settings
Setting function
1. Install the battery into the battery slot on the back of the meter;
2. Press the right button within 15 seconds to enter the tire circumference setting;
3. Refer to the wheel diameter and circumference comparison table. For example, the wheel circumference of the 28 model is 224cm, press the left button to set the three-digit value to 224(The machine defaults to 208cm)
4. Right click to confirm;
5. For more functions, please refer to the manual settings