It is applicable to speeds below 99.99 kilometers per hour. So 99% of electric vehicles are also applicable.If it is installed on an electric vehicle, it can usually be installed directly. If it is not installed, it needs to be installed with holes, using 502,101 glue, iron wire, buckles and so on. As long as it is fixed, it will do. If you don''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''t have a certain amount of hands-on ability, buy with caution.
Product name:Waterproof and shockproof typeYS468 code table (wired, without luminous)【colour】Black, white, red, and colors are shipped randomly. To choose colors(Sometimes some colors will be out of stock), Please contact Wangwang first.
【brand】Yusheng
【show】LCD display
【size】46mm*45mm*19mm
Configuration: watch body, watch stand (wired with induction probe), induction magnet, cable tie, manual.
Weight: about 75G
Functions: 1. Record driving speed ◆ 2. Record total mileage ◆ 3. Record single mileage ◆ 4. Display upper limit driving speed ◆ 5. Display average driving speed ◆ 6. Display driving time ◆ 7.12/24 hour clock ◆ 8 .Automatic cycle function ◆9. Kilometer or mile setting ◆ 10. Tire circumference setting ◆ 11. Initial value setting of total mileage ◆ 12. Driving data sampling function ◆ 13. Maintenance reminding function ◆ 14. Automatic switch machine (the vehicle does not (It will automatically shut down after 300 seconds during operation, and retain the clock function)
1. Time display
2. Calculate the average speed
3. Detect instantaneous speed (0.0-99.9KM/H);
4. Cumulative mileage (0.00-9999.00KM)
5. Upper limit speed
6. Calculate one-way mileage
7. Cumulative exercise time (0:00:00-9:59:59)
8.12/24 hour clock
9. Power saving function
10. Maintenance reminder function
11. Automatic cycle function
12. Sports information dynamic knot function
Auxiliary functions: mile/mile conversion, wheel circumference setting, LCD automatic clear screen
Whether the computer is installed correctly and in place will directly affect the accuracy and life of the computer. Please refer to the following tips for installation and debugging.
Code meter modulation installation instructions
first step:Use a coin to open the back cover of the computer, take out the battery slice inside, reinstall it, and close the back cover.
The second step:After operating the first step, a factory value of 2060 will come out, and we can see that the 0 at the end of 2060 is beating. Next, we take the 26-inch 1.95 inner tube as an example, the corresponding circumference is 2055.
third step:Let''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s talk about how to adjust 2060 to 2055.
1. Just now we said that the 0 of 2060 was beating when the factory value was released. At this time, we press the right button, adjust this 0 to 5 and then press the left button.(At this time, the right button is for digital adjustment, and the left button is for confirmation.)
The same is true for other digital adjustments.
2. When it is adjusted to 2055, we press the left button again and see a clock sign, and then it is 0:00
At this time, if we hold down the left button for about 2 seconds, a 24-base system will come out. This is to modulate the clock.
Click the right button after the 24-digit number comes out, and the form of 0:00 will come out.
At this time, use the left button to adjust the front 0 to the corresponding hour, press the right button to confirm, and jump to the rear 00 to adjust to the corresponding minute.
3. At this time we see the required interface: the same as the display speed above(km/hr)Here is the time.
In this case, we will adjust the time and circumference.
the fourth step:Install
Before installing it, take the code table in your hand and test it to see if there is any data response.
1. After fixing the head of the computer to the base, you hold the transmitter in one hand and the magnet in the other to grind it back and forth. See if the speed is not displayed, if there is any, you can load it again.
2. The meter head is installed on the car, the transmitter is installed on the right front fork, and the distance between the magnet and the transmitter is about 3MM.
Special reminder: non-contact type, will never damage your car, easy to install
1. Mount the meter head base to the handlebar;
2. Insert the AG13 button battery into the battery slot on the back of the meter to initialize the road code meter data(See the following instructions for details);
3. Insert the meter head into the slide groove of the meter head seat;
4. Install the sensor on the front fork, with the sensor head facing the spokes;
5. The induction magnet is installed on the spokes, aligned with the induction head, and the distance is about 5 mm;
6. Fix the cables with nylon cable ties;
7. Check whether the above meter head base, sensor and induction magnet are installed firmly. This package comes with necessary rubber gaskets and detailed instructions in Chinese and English to ensure your installation is successful, be considerate!
Well, it can be used normally now!
Failure and its cause
1. The speed is always 0 when driving
Answer: The distance and angle between the magnet and the sensor are not installed correctly(Try to keep it within 5MM)
2. The value displayed is incorrect when in use
Answer: The set parameters are incorrect(Such as the circumference of a bicycle wheel)
3. The display response is slow
Answer: When the bicycle watch works below 0 degrees, the temperature will return to normal when the temperature is restored.
4. Black screen
Answer: Exposing to the sun for too long, leaving it in a dark place for a period of time to return to normal
5. The display is weak
Answer: The battery contact is not good or the battery is dead, check the battery installation or replace the battery.
6. The display number is missing
Answer: Take out the battery and wait for 10 seconds before reloading it.
![](https://img.alicdn.com/imgextra/i2/550608/T2gdmvXiFbXXXXXXXX_!!550608.jpg)
YS-468A