Product name: YS468A code table
Configuration: watch body, watch stand (wired with induction probe), induction magnet, cable tie, manual.
Weight: about 100G
Specifications: length 4.5 width 2 height 4.5cm or so, manual measurement may cause errors
Functions: 1. Record driving speed◆ 2. Record total driving mileage◆ 3. Record single driving mileage ◆ 4. Display maximum driving speed ◆ 5. Display average driving speed ◆ 6. Display driving time ◆ 7.12/24 hour clock ◆ 8 .Automatic cycle function ◆9. Kilometer or mile setting ◆ 10. Tire circumference setting ◆ 11. Initial value setting of total mileage ◆ 12. Driving data sampling function ◆ 13. Maintenance reminder function ◆ 14. Automatic switch machine (the vehicle does not (It will automatically shut down after 300 seconds during operation, and retain the clock function)
1. Time display
2. Calculate the average speed
3. Detect instantaneous speed (0.0-99.9KM/H);
4. Cumulative mileage (0.00-9999.00KM)
5. Maximum speed
6. Calculate one-way mileage
7. Cumulative exercise time (0:00:00-9:59:59)
8.12/24 hour clock
9. Power saving function
10. Maintenance reminder function
11. Automatic cycle function
12. Sports information dynamic knot function
Auxiliary functions: mile/mile conversion, wheel circumference setting, LCD automatic clear screen
Whether the computer is installed correctly and in place will directly affect the accuracy and life of the computer. Please refer to the following tips for installation and debugging.
Special reminder: non-contact type, will never damage your car, easy to install
1. Mount the meter head base to the handlebar;
2. Insert the AG13 button battery into the battery slot on the back of the meter to initialize the road code meter data(See the following instructions for details);
3. Insert the meter head into the slide groove of the meter head seat;
4. Install the sensor on the front fork, with the sensor head facing the spokes;
5. The induction magnet is installed on the spokes, aligned with the induction head, and the distance is about 5 mm;
6. Fix the cables with nylon cable ties;
7. Check whether the above meter head base, sensor and induction magnet are installed firmly. This package comes with necessary rubber gaskets and detailed instructions in Chinese and English to ensure your installation is successful, be considerate!
Okay, now you can use it normally
The magnet and the sensor should be installed downwards as far as possible, the closer the two are,(The closer the better, the requirement has just been wiped)The sensor has two inclined surfaces, and the magnet rubs the inclined surface, not the vertex.