【Product name】 Yousheng Waterproof Bicycle Computer Model 268A
【Material】 Engineering plastics electronic components
【show】 Display size 27mm*23mm
【size】 46mm*46mm*20mm
【weight】 About 100G
【Configuration】 Watch body, watch stand (wired with induction probe), induction magnet, cable tie, Chinese manual
Installation reminder: Keep the sensing distance between the probe and the magnet about 2mm, the distance will not be sensed!.
Tire circumference setting function
1. Set according to the circumference of the bicycle tire.
Speed ??function:
2. Record driving speedSPD
3. Maximum driving speedMXS
4. Average driving speedAVS
5. Comparing with the average speed▲▼
Mileage function(Imperial/Metric switch)
6. Total mileageODO
7. Single mileageDST
8. The initial value of total mileage is set. If the battery is replaced, the value before the replacement can be set as the initial value.
Time function
9. Driving timeTM
10. clock(12Hour/24Hour switch)CLK
Automatic cycle display function
11.ODO,DST,MXS,AVS,TM,R,CLKFunction,Every4One content per second scrolls automaticallySCAN
Driving data sampling function
12. Real-time data sampling, professional testing, includingDSTTMAVSMXS
Power saving function
13.30If there is no input signal within seconds, it will automatically enter the power saving mode, and only the time will be displayed.
Maintenance reminder function
14. When the total mileage reaches the set maintenance value, the wrench symbol is displayed to remind the bicycle to be maintained.
water-proof
15. Has good waterproof function.
installation tips:
1. Install the meter head base on the handlebar;
2. Insert the AG13 button battery into the battery slot on the back of the meter
3. Initialize the code table data, generally only need to set the tire circumference as a parameter, it can be used normally;
3. Insert the meter head into the slide groove of the meter head seat;
4. Install the sensor on the front fork, with the sensor head facing the spokes;
5. The induction magnet is installed on the spokes, aligned with the induction head, and the distance is about 2 mm;
6. Fix the cables with nylon cable ties;
7. Check whether the above meter head base, sensor and induction magnet are installed firmly. This package comes with necessary rubber gaskets and detailed instructions in Chinese and English to ensure your installation is successful.
8. For more functions, please refer to the manual settings
Setting function
1. Install the battery into the battery slot on the back of the meter;
2. Press the right button within 15 seconds to enter the tire circumference setting;
3. Refer to the wheel diameter and circumference comparison table. For example, the wheel circumference of the 28 model is 224cm, press the left button to set the three-digit value to 224(The machine defaults to 208cm)
4. Right click to confirm;
5. For more functions, please refer to the manual settings.![](https://img.alicdn.com/imgextra/i1/791104999/T2jbtUXttaXXXXXXXX_!!791104999.jpg)
![](https://img.alicdn.com/imgextra/i3/791104999/T2JxuOXqFaXXXXXXXX_!!791104999.jpg)