Brand:Han’sHans
model:SM-55 specification:33*27*5CM
Color: blue+red
made in China
SM-55Accessories details: 1*Carrying box, 1* protective wire tube bell mouth tool, 1*Cutting pliers, 1* nail block, 1* magnifying glass, 1* diamond take nail cone, multi-specification wire protection tube-domestic(Single-line hole nails, double-line holes, and double-link nails each), 1*Double ball pendant.
Change nail steps:
Take nails:
1、When replacing the single wire hole, knock the nail block from the inside, push the old nail out of the outer frame, and take it out with cutting pliers;
2, When replacing the double-line hole nails, cut off the bell mouth part with cutting pliers, and use the nail picker to slowly rotate from the inner side of the racket to push out the old nails. When a part of the nails is exposed, use the cutting pliers to pull out.
Change nails:
3、Choose the thread protection nail of suitable size and push the new thread protection tube into the racket with the nail block.
4, If the wire protection tube is too long, you can place the wire protection nail about about3mmCut with pliers.
Bell mouth flaring:
SM-55Use of protective wire tube bell mouth tool
1-Connect the flaring tool to the power source, and through calculation, one has been heated60Seconds of flaring tool can be completed continuously15-20The task of a bell mouth.(Reminder, there is a slight irritating smell during the first heating, but it disappears after the second and third times. This is normal.)
2-Hold the handle of the tool in your hand, and keep the pointed part away from other objects.heating30Seconds to60Unplug the power after seconds. If the heating time is too long, it is easy to burn the mouth of the protective thread.
3-After unplugging the power supply, align the pointed part with the double thread hole, push the pointed part hard against the inner part of the thread protector, and rotate it clockwise or counterclockwise15The expanded hole is fuller, more uniform and beautiful. Cut hard or use vigorously. It is recommended that after the pointed tip is aligned, rotate it clockwise or counterclockwise slightly15The expanded hole is fuller, more uniform and beautiful.
4After use, waitColdThen put it into the black protective cover, and put it away for next use.(Recommendation: Keep electrical items away from where children can get)