Package Included;
& nbsp; 4L 100X70CM
& nbsp; 4M 80X60CM
& nbsp; 4S 70X50CM
& nbsp; The hand pump is also the power pump!
Since our products are all exported; therefore, even if it is a set, we will remove the original packaging, and our products will be shipped directly from the finished product warehouse; dear, please don’t mind~
Model Description:
Large: 70CM*100CM (Approximately a quilt of about 8 kg or 2 sets of down jackets)
Medium: 60CM*80CM (A quilt under 5 catties, 6-8 coats)
Trumpet: 50CM*70CM (10 singles or 2-3 coats)
Instructions:
1.Clothing drying: Before putting the clothes into the compression bag, clean it or dry-clean it, fold it into a shape that is convenient for storage and put it in the innermost, at least a few centimeters away from the sealing zipper.
2. Close the zipper: From one end of the compression bag, insert the dicing seal, if there is any slack, please try to pull it again or pinch it tightly by hand.
3. After sealing, check the zipper: After checking, use a vacuum cleaner or vacuum pump to extract air,When pumping air, remember not to remove the transparent red soft film in the valve, Because this compression bag uses a one-way exhaust valve, it will automatically suck tightly after exhausting, and it will lose its air-blocking function when it is removed!
4 The protective effect of the vacuum bag: After the air in the vacuum bag is exhausted, cover the air nozzle cover for convenient storage.
5.Clothing back to its original state: Open the two-layer closed zipper, take out the clothes to dry naturally or dry-clean, you can restore the original state! & nbsp;
Pay attention to two points when using: 1. After installing the things, first pinch the two ends of the zipper with a 5cm, and then put on the clip to seal, to seal back and forth, don''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''t just pull in one direction. Pay attention to the strength so as not to scratch the bag,(Or you don’t need clips, you can use a napkin pad on the zipper and squeeze it to seal the bag, so as to seal the bag and not scratch the bag because of the strength of the clip.)2. Unscrew the small cover on the valve and directly aim at the pump. It''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s a small cover, not all of it is screwed off, let alone the film. Some customers think that there is no way to breathe when the film is jammed, so remove the film to get the air out. This is wrong. You can squeeze the excess air out of the bag before using the hand pump to pump the air, and then use the pump, because the squeeze can squeeze out two-thirds of the air, so it can be quickly pumped Up. Those who use electric pumps to pump air, remember not to use those three connectors, just use the suction port on the pump body to pump air directly against the valve. You can contact us at any time if you have any questions about it.