1. Product features:
1, Plug in DC12VThe car cigarette lighter can be used.
2, The filter bag can be washed and reused.
3, Pick up dust and dry matter.
4, Under normal conditions, it can be used for half an hour without affecting the battery of the car. If you need to use it for a long time, please start the car engine.
2. How to use:
1, Insert the cigarette lighter head plug into the cigarette lighter socket in the car.
2, There is a power switch control button above the handle,Push the control key toONIs ready to use,Push toOFFThen stop using it.
3, Change the nozzle depending on the use occasion,250cmThe long left and right cigarette lighter connecting wires are enough to cover any position inside the vehicle for dust collection.
4, When in use, the suction port is flat against the ground,To achieve better results.
5, There is a front shell device button in front of the power control button,Press down on the detachable front shell,When used or must be cleaned,Disassemble the front shell to clean the filter,To extend lifeLife,Be sure to clean the filter away from eyes and ears.
6, Use this product can not be used to inhale combustion,Such as burning cigarette butts.
Three, matters needing attention:
1, The filter must be installed when in use.
2, Do not place in direct sunlight,Places with high temperature and high pressure.
3, Do not use gasoline or volatile detergent to wipe the body.
4, The front shell must not be taken out when the motor is rotating.
5, This product is not a toy,Do not let children play alone,So as to avoid danger.
4. Cleaning method:
●How to remove foreign objects and filter bags:
1, Remove the foreign objects from the mesh bag, press the spring and turn the mesh bag to remove it, insert your hand into the mesh bag to take out the filter bag, and pour out the foreign objects in the filter bag.
2, Cleaning the filter bag:
a, Swipe the filter bag
b, Shake the filter bag in the garbage bag
c, Clean with detergent, wipe with paper towel after washing, and confirm whether it is kept clean before using again.
3, Reinstall the filter bag:
Align the lower end of the filter bag with the mesh bag and install it together so that the spring and the filter bag are connected together.
●Cleaning of plastic parts:
Use wet wipes with hot water and mild detergent, and avoid other detergents that may contain chemicals to avoid damaging the plastic part.