Product name: domestic hood ET-60
● Interface:Bayonet, reversible installation
The lens hood can effectively block stray light from directly hitting the front lens, protect the lens, and prevent rain and dust from falling on the front lens. All models are bayonet, and support reverse installation, comparable to the original.
Material:plastic
Suitable for the following camera lenses:
CANON EF-S 55-250mm f/4-5.6
CANON EF 75-300mm f/4-5.6 USM
CANON EF 75-300mm f/4-5.6 II
CANON EF 75-300mm f/4-5.6 II USM
CANON EF 75-300mm f/4-5.6 III USM
CANON EF 75-300mm f/4-5.6 III
CANON EF 90-300mm f/4.5-5.6 USM
CANON EF 90-300mm f/4.5-5.6
![](https://img.alicdn.com/imgextra/i4/2558294622/TB2sT_YdXXXXXXYXXXXXXXXXXXX_!!2558294622.jpg)
The lens hood is often set in front of the camera lensUse photographic accessories, with various textures such as metal, hard plastic, and soft rubber.
It has the following functions:
1. In the backlight, side light or flash photography, it can prevent the entry of non-imaging light and avoid fog.
2. It can prevent the scattered light from entering the lens when taking photos with forward light and side light.
3. In lighting photography or night photography, it can prevent the surrounding interference light from entering the lens.
4. It can prevent accidental damage to the lens, and it can also prevent fingers from touching the surface of the lens by mistake. It can also shield the lens from wind, sand, rain and snow to some extent.
Lens hoods are widely used in backlight photography, generally speaking, to avoid glare. However, if the light source is close, glare may still occur. At this time, you can use your hand to block the hood on the side where the light source is located. Whether the glare is eliminated, you must observe it clearly in the viewfinder.