good news! From today onwards, the Lion Dance and Shenchuan will implement the nationwide guarantees! ! Hehe. No matter how far away you are, as long as there is a local agent, you can get the local Lianbaola~~

The shopkeeper promises: All the power tools sold in this mall are all-copper motors and genuine products! So dear ones can rest assured to buy! They are all purchased directly by manufacturers, so there are a lot of discounts in terms of prices! The motor is guaranteed for three months and is based on the standards of professionals, so you can use it with confidence!

1.620W, forward and reverse speed regulation, high speed, special for opening, classic style of source, industry quality benchmark; first-level deceleration output, high speed, fast drilling; high power, easier work;

2. It is suitable for hole-opening operations with a hole opener, and the user can install and disassemble self-tapping screws;

3. The classic type of Xinyuan electric drill, commonly known in the industry as “Xinyuan Style”;  

4. Quality benchmark, leading an era, star product; patented product.

Standard configuration: machine + carbon brush + key 

Package 1: Machine + 3, 4, 5mm drill bits each  

Package 2: Machine + 3, 4, 5, 6, 7, 8, 9, 10mm drill bits each

Package 3: Machine + 4, 6mm triangle drill each 

Package 4: Machine + 4, 6, 8, 10mm triangle drills each 

Package 5: Machine + 4, 6, 8, 10mm triangle drills each + 3, 4, 5, 6, 7, 8, 9, 10mm drills each

Triangle drill bit: 4mm4.50 yuan   6mm5.00 yuan  8mm6.00 yuan  10mm7.00 yuan  ;

Twist drill bit: 3mm1.00 yuan   4mm1.50 yuan  5mm2.00 yuan  6mm3.00 yuan  ; 7mm4.00yuan  9mm5.00yuan
10mm6 yuan 

Fang Dawang drill bit: 3mm1.5 yuan   4mm2.00 yuan  5mm2.50 yuan  6mm3.7 yuan& nbsp; 7mm4.3 yuan 8mm5.5 9mm7.00 yuan
10mm8.5 yuan 

Standard configuration: it is the money of the machine

Triangular drill bits can drill some hard materials such as concrete, ceramic tiles, glass and so on.

Twist drill bits can drill wood, drill iron and other metal materials! !

You can also contact customer service if you need any drill bits! ! This flexible ha ··· hehe! !

Instructions

Install or remove the drill bit

note:Before installing or removing the drill, be sure to turn off the tool power switch and unplug the power plug.

Wrench-type drill chuck: When installing the drill, insert the drill bit into the deepest part of the drill chuck, manually tighten the drill chuck, and then insert the drill wrench into the three holes of the drill chuck in turn, and tighten it clockwise. Be sure to tighten the three holes of the drill chuck evenly. To disassemble the drill bit, simply turn one of the holes on the drill chuck counterclockwise to loosen the drill chuck manually.

Hand-tight drill

When installing the drill bit, insert the drill bit into the deepest part of the outer clamp, hold the fixed jacket with one hand, and the rotating jacket with the other hand, and turn the rotating jacket clockwise to tighten the chuck. To disassemble the drill bit, simply turn the rotating jacket counterclockwise to loosen the chuck.

Switch operation

note:Before inserting the power plug of the tool into the power socket, be sure to check whether the switch board is operating normally,

And whether it can return when released“OFF”position.

If you want to start the tool, you only need to switch the trigger. The speed of the tool increases as the pressure of the trigger increases.

Release the switch trigger and the tool immediately stops rotating.

For continuous operation, please pull the switch trigger, and then press the lock button.

It can set the rotation speed suitable for different workpieces drilling, adjust the switch knob,Rotate in a clockwise direction, and the speed will decrease accordingly.

To stop the tool from the locked position, buckle the switch trigger to the end and then release it.

Forward and reverse switch operation

note:Be sure to confirm the direction of rotation of the tool before operating the tool.

The forward and reverse switch can only be used when the tool has completely stopped rotating. Use positive before the tool is completely stopped

Reversing the switch to change the direction of rotation may damage the tool.

This tool is equipped with a forward and reverse switch, which can be used to change the direction of rotation of the tool. Set the forward and reverse switch lever toFWDposition（Aside）, Then rotate clockwise, dial toREWposition（Bside）Then rotate counterclockwise.

Drilling operation

note:Pressing the tool too hard does not speed up the drilling speed. On the contrary, the excessive pressure only damages the drill bit, reduces the cutting performance of the drill bit and shortens the service life of the tool. When the drill bit is about to drill through the workpiece, the workpiece and the drill bit will withstand huge cutting force changes. Therefore, when the drill bit is about to drill through the workpiece, be sure to concentrate and hold the tool firmly. For smaller workpieces, be sure to clamp the workpiece with a vise or similar fixing tool.

Drilling of wooden workpieces

When drilling wooden holes, use a woodworking drill with a guide bolt for the best results. The guide bolt can draw the drill bit into the workpiece, thus making drilling easier.

Drilling of metal workpieces

In order to prevent the difficulty of center positioning when starting drilling, a shallow pit can be prefabricated at the drilling point with a center drill and a hammer. Aim the drill bit at the shallow hole and start drilling.

Please use cutting lubricant when drilling metal workpieces. The exception is copper workpieces, which must be dry drilled.

Xinyuan, a cultural brand that is honest, leading, trustworthy, and actively pursuing technology and quality, soars with its wings, soaring freely in the vast and boundless space, flying to glory, and casting success!

        Source: Daxing Yuxin· Technology as the source!