listen to the sound of the stream
Our life and work are full of noise and impetuousness
The sound of the stream brushing over the stones
ding dong ding dong
to make people feel stable
Zhan Dao - Zhan in work, proficient in Dao
Zhandao 512ULX---Let the diamond wave travel delicately and purely between carbon fibers.
Zhandao hand-made, focusing on hand-made rod body craftsmanship, dedicated to the performance of the rod body and the efficiency of fishing.
ULX: UL-tuned X series, Zhandao ULX enhanced version, pays more attention to the sensitivity of the rod, even if you touch the small mouth, you can clearly feel the rod body is further strengthened, mainly for mandarin fish, large army fish, large bass, catfish, etc. .
ULX Enhanced Version: The rod body has a super abnormal rebound ability, and the carbon fiber in the waist part of the rod body has been refined and strengthened. catty The above fish have no pressure on the waist at all. But it lacks the feeling of walking with small fish.The upgraded rod body in the second half of 2019, the back waist is upgraded to high-density four-axis carbon cloth to strengthen the waist, and the middle waist and front are strengthened by X-cross carbon belts, which improves the toughness and increases the throwing distance.
♦ About product specifications
512 and 552 are the two branches of the Zhandao series in terms of length. The connection between the handle and the rod body is divided into two types: separable and inseparable. Separable, that is, the handle and the rod body can be plugged and unplugged, and after plugging, there will be about 1cm of the vertebral body exposed as a buffer reserve. It cannot be separated, that is, the handle and the rod body are directly adhered together, and there is almost no reserved size.
In addition, the rods with the same length and coherence have the same specifications and lengths of the rods. Due to the different specifications of the handlebars of different styles, the total length of the rods after insertion will have an error of about 4cm.
♦ About product color difference
The photos provided in the product introduction are taken by professional photographers, and the fish-catching photos are provided by fishing friends for friendship, and try to keep the same as the actual products. However, due to differences in lighting, display color deviation, personal color understanding, etc. There are some chromatic aberrations, such problems are not product quality problems, and the final color is subject to the actual product.
♦ About the lengthened specification
The length of the retracted multi-section rod is generally determined according to the specification of the longest section, and the different sections of all multi-section rods are not necessarily strictly equal in length.
♦ Please note that due to the purely hand-made poles and the limitation of measurement conditions, there will be some errors in the measurement data, please refer to the actual receipt of the fishermen, please understand.
♦ About the plug-in method
• Yinlong follow-up connection method
The connection method of the two-section pole, the pole section and the handle section pole body adopts the more advanced Yinlong plug connection method in the world''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s pole-making technology. The advantage is that it is equivalent to cutting off the single-section rod and inserting a suitable vertebral body in the middle, so that the overall sense of the rod is stronger, and the force transmission and the transition of the rod body are more coordinated, ensuring better signal transmission. This plug-in method is generally used on more expensive poles.
Please note that the length of the exposed portion of the vertebral body where the rod segment of the two rods and the handlebar rod body is inserted is about 6cm. After the connection is completed, about 1cm of bare vertebral body can be seen between the rods as a wear buffer. Reserved, the purpose is to leave a friction buffer zone, the plug can be stronger, more practical and durable.
Correctly inserting and holding the rod, first put the guide ring upward, hold the two rod bodies with both hands, hold the rod body without epoxy wrapping and no guide ring, visually observe the two rod guide rings, and rotate left and right to insert the rod. Connect the rod body so that the guide ring is in a straight line, continue to rotate until about 1cm of buffer is reserved, and then insert it tightly, as shown in the figure below.
Two-section rods, the cross-section of the interface between the rod section and the handle section rod body is made of high-strength K cloth for reinforced sealing. K cloth is a kind of carbon fiber woven cloth with special functions, which appears to be crossed horizontally and vertically, and its thickness is about twice that of ordinary carbon cloth. In order to prevent the interface from bursting due to improper handling, it is necessary to carry out lap processing when using K cloth sealing. The overlapping part will look thicker than the part that only wraps around the package without overlapping. Therefore, the appearance of the cross section and the visual effect will be uneven in the tube wall, and the overall strength of the rod will not be affected by this, which is a normal situation. Please understand.
exhibit:↓ Yinlong plug-in method
exhibit:↓K Cloth-sealed interface cross-section
1. For the rod body of Zhanluoya rod, in order to pursue the stability of fishing, it is preferred to import 100% original packaging"TORAY"（Toray Japan）Carbon wire, our designers and technicians are all from the grassroots level, starting from the personal experience of anglers, designing, developing and testing step by step, and finally bringing exquisite lure rod products to the market, and then flowing into the majority of lure enthusiasts hands.
2. The guide rings used in the poles are imported from Japan''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s FUJI company. It is more convenient to pursue the comfort of stream casting and the efficiency of micro-object fishing. Fuji guide ring has won the favor of fishing enthusiasts with its smooth and wear-resistant characteristics.
3. The tonality of the rod and the performance of the rod body are independently developed and designed by the R&D team of Zhandao Company. The essence of its core is in the strong team of Zhandao Company. The tonality of the rod body, the craftsmanship, the comfort of the grip, the comfort and directivity of the rod casting, etc., all require the strong cohesion and comprehensive strength of the entire team of a company. A single thought concept can solve it.
fish someone（IMMERSION）Each rod is strictly selected and carefully crafted.
Because of being picky, so refined.
The picture below shows the wonderful combination of the classic cork ULX enhanced version of Zhandao gun handle and CQ drum wheel, hit the big catfish, take pictures and let go（fisherman shooting）:
Zhandao gun handle classic cork ULX enhanced version, with warhorse water droplets to catch fish（fisherman shooting）:
The main differences between ULK and ULX enhanced version are mainly divided into the following points:
1. ULK is medium-fast and fast-adjusting, the parameter labeling is ULK, and the bait weight range is 0.8 to 5 grams;
ULX Enhanced Edition is super fast adjustment, the parameter label is ULX, and the bait weight range is 1 to 6 grams.
2.ULK is suitable for special fishing catty Small fish around.
ULX enhanced version, suitable for special fishing two or three catty left and right fish;
3. ULK mainly targets small fish such as horse mouth, baitiao, Xige, and Xiaodaiqiao. In the process of throwing small bait, the ULX enhanced version can also calmly deal with slightly larger cockroaches, bass and mandarin fish. It is mainly aimed at large-sized fish such as bass, mandarin fish, and cockroach. It is especially suitable for fishing methods with high sensitivity such as soft insects jumping to the bottom.
The common feature of ULK and ULX enhanced version is high sensitivity, which can be felt when touching tiny objects. Under the appropriate configuration and skilled operation, if you use 2.5g sequins, ULK and ULX enhanced versions, the throwing distance can generally reach about 30 meters.
Rod Sensitivity:
1. UL with the same hardness, slow (Slow), medium (Medium), medium fast (Medium fast), fast (Fast), ultra fast (Extra Fast), the sensitivity increases in turn.
2. Coherence of UL, carbon fiber is more sensitive than glass fiber.
3. For UL with the same hardness, the sensitivity of four sections, three sections, two sections and single sections increases in turn.
The degree of tonality varies from person to person. Many people say that the pole throwing is comfortable and the sensitivity is extremely high, and there is basically no possibility of existence.
The picture below is a picture of the fish bending in the ULX enhanced version.
The reason why Zhanluya rod is preferred to Japan''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s cost-effective Fuji A-ring is that only the Fuji guide ring above the A-ring can use KR, KW bracket and FUJI''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s classic anti-crosswind and anti-winding micro-guide ring system. Generally, the Lu Ya rod with a price of 600-800 yuan will use the A guide ring system of the pure K bracket. The Fuji A ring we choose is imported from Japan''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s FUJI company.
Compared to Fuji''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s other lower end guide rings, Fuji A-rings have good wear resistance, heat dissipation, and lighter weight.
Fuji KR and KW systems are more anti-winding and anti-crosswind. Compared with the old-fashioned guide ring, the straight-shank KR guide ring system can effectively avoid the phenomenon of spinning wheel out of the rod body, lighter, more anti-winding, and more throwing. The gun handle KW guide ring ensures a good outlet angle, and can effectively scrape the water droplets stuck on the wire when throwing, making the wire outlet more smoothly.
We all know that there is a situation that the fishing line is generally easier to adhere to some dust during the fishing process. Next time you go fishing, you can pay attention to the comparison. The surface of the low-end guide ring is more likely to be covered with a layer of dust, which not only affects the smoothness of the outgoing line, but also affects the service life of the line. Starting from Fuji''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s high-end A-ring, Fuji has applied a smooth nano-coating to the guide ring. The biggest advantage of this is that after a fishing trip, the Fuji A guide ring is generally not easy to get ash, even if there is a small amount of sticky ash , is also easier to care for and clean than low-end guide rings.
♦ Notes on the use of rods:
1. When the fishing rod is in use, it is generally necessary to pay special attention to the following points:
1. Avoid being accidentally caught by the door.（When switching fishing points, the rod does not receive bait, but sticks out directly from the window. Be careful not to get caught by the window and door.）
2. Avoid violently picking up relatively large fish due to the excitement of the middle fish.（If you hit a big fish, remember to adjust the unloading force and slowly walk the fish to rewind the line and return to the fish.）
3. Avoid the bending angle of the rod body is too large during the fishing process, such as hanging the bottom, or when the fish is medium and large, and the bending angle of the rod body itself exceeds 90 degrees, which can be defined as the angle is too large and the force is too large Sudden.（It is recommended to use gloves or lining to pull the line to handle the bottom hanging. If you can''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''t handle it, it is recommended to cut the line. If you pull the line directly, the rod and wheel will be easily damaged.）
4. Avoid sudden and excessive force on the part of the rod body during fishing, especially the part of the rod in the process of casting.（For example, the line reserved for throwing bait is long, if you forget to press the outlet switch when throwing, suddenly force is applied, and the bait hits the rod body, which is prone to sudden excessive force on the rod body.）
Others are within the bait weight range, and there will be no problems in normal fishing operations.
2. The handle with double nut, when loading and unloading the reel, can be completed by moving the clamp up and down, combined with the operation of the double nut. Keep in mind that the movable clamps all have their own grooves. Align the grooves and the casters, and fix the upper and lower movable clamps. Double nuts can only be screwed one by one, not two nuts at the same time.
Double nuts, one for fixing and the other for locking. When actually operating, it must be screwed individually one by one.
3. Hand-refined goods, handles or other accessories, such as some natural traces of cork or solid wood handles, chromatic aberration of metal parts, unavoidable hand-made traces in any part of the rod, more or less imperfections that you are picky about, it is recommended to pursue 100% perfect parents decide carefully, please understand!
Zhandao X8 SPIDER''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s hybrid cross weaving process is 15% lighter, 20% stronger and 20% more sensitive than the rod body rolled with ordinary multi-layered filament carbon cloth.
♦ smooth transfer of force:
A qualified lure rod should have a basic ability, which is the ability to transfer force. The rod relies on professional rod body design and the step-by-step decomposition of the force by the guide ring to complete the smooth transfer of force. The design of this part is directly related to whether you can cast smoothly, make movements with the help of the rod body, and play fish smoothly.
♦ Counterweight Balance:
Through a comprehensive analysis of the weight distribution of each component of the entire pole, the principle of leverage is well used, and the fish avoids the pole just right“top-heavy” problem. The balanced counterweight will make you not feel fatigued when facing all-weather and long-term casting fishing.
The unique X8 spider craft process, combined with the high-density four-axis back waist reinforcement process, is used to accelerate the waist force of the rod body, the acceleration of the tip of the rod, and the ejection when throwing. When throwing, the waist bends, resulting in The elastic potential energy can be almost completely converted into the kinetic energy of the lure. If it is a rod with poor tonality, the principle is the same, the bait has gone out, the waist of the rod body has not rebounded, and the casting is not accurate and not far enough.
Although the years are not forgiving, we have never spared the years. ---Fish someone, you always get a little more than you want.
Luya rod, copy net reservation and delivery time
1. Copy the net and the two-section and four-section poles, which will be shipped in about 3 days after payment. Subtle 511 series refer to the aging described in detail.
2. Hooks, lures, lines, boxes, etc. will be shipped within 48 hours.
3. If there are many types of orders, the delivery refers to the longest time limit.
Postage and courier
1. Luya pole, copy net randomly send Debon or SF Express（free shipping）.
2. Hook, bait, line, box, etc. rhyme（Free shipping over 100 yuan）.
3. Except for special circumstances.
Package acceptance reminder
The company has signed a cooperation agreement with SF Express, Debon and Yunda. The recipient please unpack and inspect the goods on the spot when the dispatcher dispatches the goods, and then sign for the goods after confirming that there is no problem.
If the outer packaging of the received goods is damaged, or if you open the package and inspect the goods, and find any problems with the goods, please do not sign for them. The first time, contact our online staff to find the right solution.
If you are unable to unpack and inspect the goods in the presence of the courier, please communicate with the courier in advance and choose another day for delivery.
If you entrust anyone other than yourself to sign for the goods, you will be deemed to have signed for them yourself. The buyer will be responsible for the damage and other problems found after the receipt（For example: problems caused by express delivery such as damaged or missing goods）.
Received a new rod, tonality test
In order to have a better shopping experience for you, for the test of the tonality of the new rod you just received, please keep the plastic film intact, do not install wheels, do not enter the water, in a clean environment, on the premise of ensuring safety, It can also be tested to see if it is the rod you want. For example, customers participating in trade fairs test the performance of the rods alone. Almost no one takes a wheel and puts it on each rod to throw the test rod. Thank you for your understanding and cooperation!
♦ Daily maintenance of lure rod
1. The pole should be stored in a cool and dry place.
2. Do not expose to the sun, fire and contact chemical solvents.
3. When the outside temperature is high, it is strictly forbidden to put the fishing rod in the trunk of the car for a long time. Baking at high temperature will cause the rod to bend and deform.
4. During the fishing process, avoid direct friction between the rod and the sand, so as not to damage the surface of the rod body.
5. After using in sea water, please clean it thoroughly with fresh water and a clean soft cloth in time, and then store it.
6. Stainless steel is a material that is not easy to rust, which does not mean that it will not rust in any environment. Fuji stainless steel brackets may rust if they are not cleaned in time or stored improperly. And the porcelain ring of the guide ring, if it is not cleaned, there will be foreign matter attached, which will affect the smoothness of the guide ring in subsequent use.
7. For daily maintenance, please use a soft cloth dipped in diluted neutral detergent to wipe.
♦ About after-sales service
1. The poles are all handmade, and there is no guarantee that every part of the pole is perfect. Yuxu is willing to provide more cost-effective products for every lure lover. Every production process, every step of the quality inspection process, and every packaging link are all poured into Yu''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s ardent blessings and sincere gratitude to new and old customers.
2. If you are not satisfied with the goods you received, please contact our staff as soon as possible. All products in this store support the return and exchange of the 7-day return rule. If you don''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''t like it, choose the wrong model, etc., all supports the 7-day return rule.
3.For matching related accessories, please refer to the dedicated after-sales link in the store.
♦ Little common sense: an introduction to the handle material and cork.
Cork tree generally lives in Portugal, also called"cork oak", its characteristics, the skin can be regenerated, can be repeated stripping. Usually 20-year-old plants or plants with a diameter of more than 20 cm can be peeled for the first time, and then peeled again every 10-20 years, and the peeled skin is cork.
The texture of cork itself is loose and porous, soft, elastic, and impermeable to water. Its unique physiological characteristics determine that it has very good elasticity, sealing, heat insulation, sound insulation, electrical insulation and friction resistance, plus the advantages of non-toxic, odorless, small specific gravity, soft hand feel, and not easy to catch fire. , there is still no man-made product comparable to it.
In terms of chemical properties, ester mixtures formed by several hydroxy fatty acids and phenolic acids are characteristic components of cork, collectively referred to as suberin. These substances are resistant to decay and chemical erosion, so they have no chemical effect on water, grease, gasoline, organic acids, salts, esters, etc., except for the corrosion of concentrated nitric acid, concentrated sulfuric acid, chlorine, iodine, etc.
The following is a brief introduction to the cork handle making process. Raw material loose and porous cork veneer↓
After the cork bark is punched, strung together, and then glued together, it is the cork stick on the left, and then polished and smoothed to become the cork handle for our pole.
The picture below is a photo of the cork handle during high-speed rotation during the production process. Because of the high speed, the photo effect of the handle surface is relatively smooth.
The machine stops to see the pit-hole structure on the cork handle. These are all determined by the material itself and are normal phenomena.