describe

It is made of closed-cell foam covered with fabric and produced in our factory in the UK.

Each Superflex partition（“Superflex flip”except）Both consist of two parts-each side stores a different item. In some sizes, it can be two lenses.

Packed in 550, 5 and 7 series bags with Velcro strips inside（Some very old bags are not sewn with this kind of Velcro- If you need other options, please contact us）.

• The size table and other instructions are in the following instructions.

SuperFlex partitions are used to separate equipment in certain Billingham bags.The position of the partition inside them can provide a square compartment.Please note that these products are designed to be used with the padded base in our bag-the SuperFlex divider does not have its own base.
 

There are many different lenses and other exquisite equipment available today, and we need to develop a variety of SuperFlex models to adapt to them.We think we have put forward various sizes that can meet almost all needs, and can protect your precious investment from the most serious impact.

When choosing, remember that the wall partition is very flexible, so if it is suitable for a closer fit, the lens that fits it may be larger than you expect.The gray image is“top down”View, the white image is the shortest side view.

Superflex partitions are always 15 cm front and rear -So that it can be placed back and forth in the main compartment of 225, 335, 445, 555, 550, 107, 207, 307, 307L or similar bags.

Please note:
-“Superflex bezel”The size is W150mm（5??“）x D95mm（3¾”）x H8mm（¼“）. These sizes do not include Velcro®The size of the strip, the strip will be in the''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''D'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' size.This size is too big to fit in a bag like Hadley Pro or Hadley Small（Although many people are using it）, But it is very suitable for 225 and other bags 335, 445, 555, 550, 107, 207, 307 and 307L-the same bag Superflex Partitions can hold.
-Thanks to Buckingham（Billingham）All of the camera bags are sewn with a label with the words''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''Billingham England''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''. This label is not separately sewn on the inner bag or accessories supplied with the bag, except for separately purchased parts.）.
-If you have an old Billingham tote bag with an inner bag that looks like these dividers, the names of these dividers may be“ 915 A”with“ 918 A”.Since then, we have slightly changed the position of the central divider, so please check the size chart to make sure the size you buy can meet your current needs.
-These are the colors inside the bag（So you can buy matching dividers）:

common problem

Which size fits my bag?
All sizes listed should fit any 550, 5 series or 7 series bag（Exception, some higher packages cannot be put into smaller packages such as 225）.You should select the desired partition according to the lens you want to put in.For example, using a lens that is 10 cm wide and 18 cm long:

• Size fit“ 10-18”
• If needed, you can compress it to“ 9-18”（Push the sides slightly outwards to form a tighter fit）.
• “ 8-18”It might be too tight.
• “ 10-15”Too short-the lens will peak at the top.
• If you don’t want the lens to go straight to the top, but it’s definitely not suitable for shorter（Shorter）Duffel bag（E.g. 225）, You can choose“ 10-21”.

Will these fit non-series 5 and non-series 7 packages-such as Hadley Pro?
Most sizes can fit in most of our handbags-but they are not designed for this.

Is there a base at the bottom of these dividers?
The base of these dividers is not the padded base of the bag itself.If you lose the padded base, you canit''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s herePurchase alternative products.

How are these attached to the bag?
They have Velcro at both ends（Velcro）, Can be fixed inside the bag.They also have Velcro on the sides, which can be connected to each other to increase stability.If there is no Velcro in your bag（Some old bags don’t）, Then in most old bags, we can sew lined lining and Velcro strips for you-we charge a fee for this, and you will need to send the bag to us.

If you don’t have Velcro on the wall of your duffel bag, another option is the SystemFlex Divider Set（The type originally provided with the duffel bag）.If you contact us via the link above, we will sell one for you, but we currently do not list them on our website（We don''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''t like them like SuperFlex!）.

I just want a divider.Do you sell those?
Yes! You can check our DF divider.Just like SuperFlex, the ones mentioned on this page“ 15-15”The size is the correct size-15 cm from the front to the back of the bag.

I can find the size that fits the lens, but can''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''t I find the size of the camera?What am i missing?
We tend to recommend that you put the lens and flash/flash into the SuperFlex partition.Then, we tend to suggest that you set the camera（With or without lens）Put it in the negative space between SuperFlex partitions.We will not determine the size based on the size of the camera itself, although there are obviously small cameras（For example, a rangefinder with a pancake lens）Can be put in it.