Camera multi-function flash holder E type can be connected to the tripod lamp holder, plug in the soft umbrella, 180 degrees to adjust the pitch
Type E: The hot shoe can be adjusted tightly. It can be installed on any lamp holder. It is equipped with a tripod turning lamp holder screw, which can be installed on a tripod.
In 2009, the latest flash mount was newly launched. The hot shoe part can be removed, and the lamp holder and tripod can be combined. The combination part is easy to install. It has a built-in bayonet and a safety lock.
It can be applied to all kinds of flashes. After connecting the flash, it can be directly connected to any lamp holder, which is convenient for photographers to use the flash to fill in multi-directional light when shooting outside.
There is a socket for plugging in a reflective umbrella or a soft umbrella at the lamp holder, and the flash angle can be adjusted 180 degrees. Make better use of the flash to light and fill up the subject.
There are screws to tighten the flashlight connection to prevent the flashlight and the lamp holder from being unstable. The safety factor is increased.
In addition, our shop has lamp stands and reflector umbrellas and soft umbrellas that can be used together with the lamp holders. Welcome to buy!
A new multi-function flash stand that can support both the light stand and the tripod is newly launched. The main body material is made of cast iron, which is super load-bearing and durable. The bottom of the lamp holder adopts the universal screw hole design of the lamp holder, which can be installed in most special lamp holders; it can be used on the conventional PTZ quick-release plate with an aluminum alloy screw adapter; the main body of the lamp holder is composed of two sections and adopts a stepping design The load bearing direction can be changed left and right by adjusting the knob, and the vertical load can be at least about 3 kg. The top of the lamp holder is composed of two parts. The self-contained adjustable-pitch hot shoe is suitable for all Canon and Nikon flashes by adjusting the screw; when the hot shoe holder is removed, it becomes a small head with fine-tuning height. At the same time, the reflector/soft umbrella socket designed by the lamp holder can be inserted into the standard size reflector/soft umbrella. The lamp holder can be freely combined with any lamp holder, pan-tilt, flash trigger or similar equipment, and has a wide range of applications. It is a portable, sturdy, simple and comprehensive photographic aid.
Maximum load: 3kg
Product height: 12cm
Product weight: 250g
Multi-function flash lamp holder:
1. The hot shoe of the lamp holder is made of metal parts, with adjustable screws for different standard flashing lights(No Sony Minolta port)
2. The umbrella insertion hole is designed with a one-way circlip to prevent reverse insertion, and the lock screw is used to fasten the umbrella pole;
3. The joint part of the lamp holder is designed with teeth and is equipped with a fastening handle to prevent the lamp holder from falling down instantly when tilted, which is beneficial to protect the lamp;
4. The lamp holder supports different lamp holder connectors and is equipped with locking screws;
5. Exquisite workmanship, sturdy and durable, with a load capacity of up to two kilograms
Aluminum alloy adapter:(Use the current tripod, no need to buy flash stand)
1. Exquisite workmanship, surface polishing treatment, standard thread, support a variety of PTZ quick-release plate screws, such as Gitzo, Manfrotto, Admiralty, Benro and other quick-release plates are applicable;
2. High-purity aluminum alloy, strong and durable, never rust;
3. The conversion head is about 3 cm high, small in size and easy to carry; o
It can be combined with the soft light umbrella reflector umbrella to freely combine the exquisite miniature suit, which is very suitable for irregular product shooting fill light, or macro shooting of larger volume products, but the soft box can not meet the occasions, of course, studio portrait fill light or bonsai, The occasions where the flash auxiliary light is required for sketch shooting(When the flash cannot be used directly)Especially applicable,
In addition, our shop has lamp stands and reflector umbrellas and soft umbrellas that can be used together with the lamp holder. Welcome to buy!
Otherwise:
Type A: Fixed card slot, no locking device, suitable for flash with its own retractable system.
Type B: Sliding card slot with locking device, which expands the applicable flash range.
Type C: Sliding card slot, with locking device, can be directly installed on the head.
Type D: Sliding card slot, locking device, and adding an adapter for easy use on a normal tripod.
Type E: Sliding card slot, locking device, more powerful (already on the market, stay tuned)