Applicable models: place an order and leave a message about your camera model Produce installation steps: 1. Open the blister of the Canon protective screen, and remove the plastic protective film on the surface of the protective screen first, and then take out the Nikon protective screen; 2. Wipe the camera display with a soft cloth, free of oil, sweat, or dust; 3. Tear off the protective sticker on the back of the Nikon protective screen; 4. Place the camera carefully, align the Nikon protective screen with the two adjacent sides of the camera screen, and gently put it down. Check whether the Nikon protection screen is aligned with the camera screen. If there is a slight difference, push it straight from the side, confirm that it is aligned with the LCD screen, and then press evenly around the Nikon protection screen, and then use a cloth to cover the outside of the screen. Just wipe it clean. Disassembly method: If you have to take it off if it is not properly attached, please use a plastic sheet with a thickness similar to that of a business card(Such as the lining of the Nikon protective screen hanging card packaging)Gently insert the junction of the Nikon protective screen and the camera screen, turn around the Nikon protective screen to separate the protective screen from the camera screen, and then lift the protective screen gently and forcefully, and wipe it clean to align the focus. |