Features of digital pilot series induction microphone system:
The industry’s first patented automatic human hand sensing technology, the microphone will be silent for 3_5 seconds without the human hand (any direction, any angle, even the volume
Yes), automatically save energy after 5 minutes, automatically shut down after 30 minutes and cut off the power completely. It is a new concept of intelligent and automatic
Wireless microphone
Wind ·
【1】1ECO MODEMicrophone static 3-5Auto mute in seconds
【2】 Mute for 5 minutes to automatically turn off the launch
【3】 Enter energy-saving state
【4】 Auto shut down after 30 minutes of silence
Brand-new audio circuit structure, delicate treble, strong mid and low frequency, especially in the sound details with perfect expression. Super strong
The dynamic tracking capability makes it easy to pick up and play at long and short distances.
UHF frequency band, phase locked loop (PLL) frequency synthesis
100× 2 channels, channel spacing 240KHz
Super heterodyne secondary conversion design, with extremely high receiving sensitivity
The radio frequency part adopts multi-stage high-performance dielectric filters with excellent anti-interference ability
The first intermediate frequency uses a SAW filter, and the second intermediate frequency uses a three-stage ceramic filter, which greatly improves the anti-interference ability
The specially designed mute circuit completely eliminates the impact noise of microphone opening and closing
The microphone uses Tesco''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s AA battery, which lasts for 6-10 hours
The microphone uses a unique boost design, the battery power drop does not affect the overall performance of the hand microphone
Ideal environment operating radius up to 80 meters, suitable for various occasions
The default configuration is an aluminum alloy microphone tube with a blue backlight on the LCD screen
1. With adjustable transmit power and adjustable squelch threshold, the receiver’s rear panel is equipped with an external squelch control knob, which can be
Flexible setting of effective operating radius between 10 meters and 80 meters
-With infrared automatic linking function, the microphone can be quickly synchronized to the working channel of the receiver
With analog pilot function, it can effectively solve the noise caused by false reception
KTV engineering special model, two microphones, one host. Easily configure more than 100 KTv private rooms, with unique product structure design,
Maintenance is quick and easy.
Also used occasions: used in high-end KTV rooms, small and medium-sized drip outlets, style rooms, meeting rooms, etc. It is a new product for measuring points this year and is extremely popular
Customers are welcome. Packing type: conventional color box packing (see product model for details)
Smart sensor receiver operation
This series of products consists of a handheld microphone and a receiver. It also includes audio output cables, batteries, auxiliary mounting brackets and
Accessories such as matching screws and product manuals.
Smart sensor receiver function resistance
①Power switch: lightly press the power switch, the LCD lights up, the power is turned on, press the power switch again for 3 seconds, the LCD turns off
The power is off.
④Four function keys: Press ⑨“SEL" to select left and right, press ③“▲”④4“V” to select the currently selected menu
Change the status and then press ②“SET“ to set the effect.
⑤Liquid crystal display (LCD): display channel, mute, received signal level, audio level, etc.
⑥Infrared linking window: cooperate with the "SET" key to transfer channel parameters to the transmitter.
⑦⑧Volume adjustment button/knob
Smart sensor receiver operation
Power socket: DC12V500mA power input socket, the center electrode of the socket is connected to a positive voltage.
①Antenna jack
12 Audio mixing output: Mix two signals together and output.
③Audio balance output: suitable for long-distance connection to effectively reduce the noise caused by the connection line.
① 8-level RF level display: display the received RF signal strength.
②8-level audio level display: display the size of the audio signal.
③Frequency menu display: When FREQ is on, the following 6 characters display the current operating frequency.
④Channel menu display: When CHAN is on, the current working frequency is displayed.
⑤ Mute display: When the MUTE light is on, it means that no RF signal has been received.
⑥Channel display: Dynamically display the currently automatically selected antenna channel. Work represents the A antenna, and [Ⅱ represents the B antenna.
PAGE 05
Use and operation of smart sensor series microphone
1. Turn on and off the function.
Turn on the hand microphone, after the backlight goes out, press and hold the power button (note: keep pressing and not let go), the hand microphone will shut down normally after 2 seconds (the power is now
Press the source button still), wait 10 seconds, the microphone will automatically turn on, and display senon (indicating that the sensor function is turned on) or sen off (memory
Indicates that the sensor function is off), release the power button at this time, and the hand microphone enters the normal working mode. Turning on and off the sensing function is the same operation, just
Just repeat the operation. It should be noted that the power button of the hand microphone is not released during the whole process.
SEA O
SEROFF
Induction open display\
Sensor off display
{/
2. High and low power switching
In order to adapt to different use occasions, the microphone is designed with a high and low power switch. When the switch is set to the high power H position, the microphone’s transmit power
High, the use distance is the farthest (the effective use distance is about 200 meters in the open space), and the power consumption is large. When the switch is set to the "L" low power position, the microphone transmit power is relatively
Low, the use distance is relatively short (the effective use distance is about 60 meters in the open space), and the power consumption is small. The user can choose the setting according to the actual situation
3. Infrared pairing
Press the host SET button to enter the infrared linking mode. The specific operation method is as follows: turn on the hand microphone, aim the display of the hand microphone at the launch window of the host, and press
Press the host SET button, and the microphone will automatically synchronize to the frequency point set by the host.
4. Turn on and turn off operations
Press the power switch down for about 2 seconds, the microphone display will light up and the LCD screen will display related work information, including the operating frequency (signal
Road), battery power and other information. Pay attention to check the battery power display status every time you turn on the phone, and choose whether or not according to the actual length of time to be used
Replacement battery. Under normal circumstances, a pair of ordinary AA batteries can be used for 8 hours. When the battery level is 1 bar, the display will flash
A low-voltage prompt "OW BAT" is displayed, indicating that the battery is about to run out. Please replace the battery. In addition, the backlight of the display after the microphone is turned on
It will automatically turn off in a few seconds and enter the energy-saving mode. If you need to view the information on the display while in use, just tap the power switch. Press power
Hold the switch for about 3 seconds, the display shows "OFF", and then the microphone will shut down. When the microphone is not used for a long time, please remove the battery,
In order to avoid battery leakage to corrode the circuit board and damage the microphone.
5. Install the microphone battery
Take the handheld microphone out of the package, unscrew the tail tube, insert 2 AA batteries according to the marked polarity, and then turn the tail tube back.