Free shipping is only available in the whole country
Some areas, except Xinjiang/Tibet/Ningxia/Qinghai/Inner Mongolia/Hainan.
Mini surf
800
installation manual
The center of gravity is 1cm behind the carbon tubes of the wing! The manufacturer''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s tutorial is not accurate
http://v.youku.com/v_show/id_XMzk4MDgzMzQxMg==.html
Thank you for choosing a series of model airplanes produced by Geying Airlines. The model airplane adopts
EPP
Made of material, the appearance is real, the structure is simple and easy to maintain, the wing is equipped with main wing stiffening rods(Need to install), To ensure flight strength and flight quality, super resistance to fall, play resistance, easy maintenance, small and easy to carry, not limited to the field, it is the best entry-level aircraft model and one of the special models for aircraft model teaching. When you are ready to fly, please read this manual carefully.
This manual is suitable for mini surfing
800
,nickname
[
Mini
800]
Due to wingspan
80
Centimeters, easy to paint, super resistance to fall and gliding, named after it. Installation instructions, all text and pictures are for reference only, product configuration is subject to the actual product, and subject to change without notice.
Important statement
The remote control model uses a variety of high-tech technologies to design and manufacture sports and leisure products with a certain degree of complexity. The user should master the corresponding operation technology and safety rules. There are different degrees of danger during the operation. Please pay attention to it during use. Personal and property safety of oneself and others.
Model goods are technically operational and consumable products. After use, disassembly and assembly, they may cause varying degrees of damage. If the goods are defective or unsatisfactory due to the use process, they will not be able to be replaced or returned within the warranty conditions. If there are problems with use or maintenance, our distributors will provide technical guidance and parts supply services.
Remote control aircraft in flight or high-speed motor operation are highly dangerous. Please stay away from the crowd during the flight. Improper assembly, damage to parts, operating errors, etc. may cause the aircraft to lose control and accidents. Please pay attention to safety!
Age suggestion: This product is not a toy, limited to
8
Use under the guidance of an adult over the age of
Propeller power standard configuration:
Motor:
A2204KV2300-a2208KV2200
ESC:
20A -30A
Can
Propeller: two blades
5050-5035
Servo:
9
gram
-12
Grams, three
remote control:
4
Pass above
Battery
: 1500-2200
Milliampere
3S,
The battery is placed at the front of the cabin
1500
Head slightly light.
, The main material of the aircraft is
EPP
, Please stay away from all fire sources to avoid deformation, damage and burnout of the aircraft due to high temperature
.
Installation steps
1
First adjust the mid-position rocker arm and tie rods and sleeves of the steering gear inside the fuselage and install them into the fuselage. Apply glue on both sides of the fuselage. After a few minutes, the left and right fuselages are aligned and closed. , The steering gear needs to be returned to the center to install it firmly, and the tie rod and rudder angle.
3
The motor and ESC link is adjusted after confirming the direction of rotation
(
Adjust the first-person propeller to turn clockwise, the words on the propeller are forward,
The propeller is forward and reverse, such as the number on the propeller is facing the direction of the nose, the propeller is clockwise from the rear of the machine, and the propeller can be adjusted arbitrarily.
2
Adjust the motor wire, adjust the motor seat on the motor, install the two pieces of foam seat on the motor, first place the motor wire and place the motor, put the two pieces of motor foam on the glue and wait for a few minutes, then the motor foam is closed, and then installed on the wing , The glue sticks firmly. The ESC is embedded in the opening of the front section of the motor for the purpose of heat dissipation and maintenance.
The battery is placed at the front of the cabin, and the center of gravity is near the reinforcing rod under the wing. After adjusting the center of gravity, the battery needs to be fixed
Aircraft wingspan 80 cm = 800 mm, packing box size 87*18*10 cm