HUMMER solid EPP 3D machine
The fuselage of this machine adopts 15mm thick EPP board, and the wing is cut out with 30mm thick EPP board, which is full of materials;
The fuselage and wings are reinforced by two 1.5mm carbon fiber rods to ensure the rigidity of 3D flight. The horizontal tail adopts an original strengthening method to ensure that it does not deform when pushing and pulling the rod;
The connecting part of the landing gear and the fuselage is no longer as thin as the traditional EPP aircraft, and it is full of strength;
In general, this is an EPP 3D entry-level aircraft that is resistant to fall, cheap, and has very good flight performance. The electronic equipment required is also the most commonly used and most economical on the market. For model friends who are ready to choose a 3D entry-level aircraft, this aircraft is definitely your right choice!
basic data
Wingspan: 1000mm
Length: 950mm
Flight weight: 450—500g
Configuration requirements
Remote control: 4 channels or more
Servo: 8g or 9g*4
Electronic governor: 20A—40A
Motor: 2212—2217 external brushless
Propeller: 1047, 1050, 1147, 1155
Battery: 11.1V 850mAh—11.1V1500mAh 20C or more
Suggested center of gravity position: 120-130mm from the leading edge of the root of the wing
Suggested rudder surface angle: Aileron +-40°
& nbsp; Elevator+-50°
& nbsp; rudder+-50°
![](https://img.alicdn.com/imgextra/i2/16589845/T2bW1uXdRbXXXXXXXX_!!16589845.jpg)
![](https://img.alicdn.com/imgextra/i1/16589845/T2bktIXXJcXXXXXXXX_!!16589845.jpg)
![](https://img.alicdn.com/imgextra/i2/16589845/T2y9OpXfJbXXXXXXXX_!!16589845.jpg)
![](https://img.alicdn.com/imgextra/i4/16589845/T2kf4DXgXNXXXXXXXX_!!16589845.jpg)
![](https://img.alicdn.com/imgextra/i2/16589845/T2aW1vXgBbXXXXXXXX_!!16589845.jpg)
![](https://img.alicdn.com/imgextra/i4/16589845/T2lzxDXgRNXXXXXXXX_!!16589845.jpg)
![](https://img.alicdn.com/imgextra/i2/16589845/T2pTypXfXbXXXXXXXX_!!16589845.jpg)
![](https://img.alicdn.com/imgextra/i2/16589845/T2aW1vXgBbXXXXXXXX_!!16589845.jpg)