- The following installation tutorial is for reference only
- http://v.youku.com/v_show/id_XMzk3NjIwNjE3Ng==.html
Send foam glue + Y line (Worth 4 yuan)
Wingspan 80cm
Empty aircraft = epp foam aircraft + basic accessories
The factory default of the aircraft is 3 channels(The rudder surface hinge is not open. You can change it to 4-way diy. The accessories are self-provisioned. Novices are not recommended to change it. Small aircraft is of little significance)
devil800Model installation instructions
Thank you for choosing a series of model airplanes produced by Geying Airlines. The model airplane adoptsEPPMade of material, the appearance is realistic, the structure is simple and easy to maintain, and the wing is equipped with main wing reinforcement rods(Need to install), To ensure flight strength and flight quality, super resistance to fall, play resistance, easy maintenance, small and easy to carry, not limited to space, it is the best entry-level aircraft model and one of the special models for aircraft model teaching. When you are ready to fly, please read this manual carefully.
This manual applies to the devil800,nickname [ devil800] Due to wingspan80Cm, named after the weird painting. Installation instructions, all text and pictures are for reference only, product configuration is subject to the actual product, and subject to change without notice.
Important statement
The remote control model uses a variety of high-tech technologies to design and manufacture sports and leisure products with a certain degree of complexity. The user should master the corresponding operating technology and safety rules. There are different degrees of danger during the operation. Please pay attention to it during use. Personal and property safety of oneself and others.
Model goods are technical operations and consumable products. After use, disassembly, and assembly, they may cause varying degrees of damage. If the goods are defective or unsatisfactory due to the use process, they will not be able to be replaced or returned within the warranty conditions. If there are problems with use or maintenance, our distributors will provide technical guidance and parts supply services.
Remote control aircraft in flight or high-speed motor operation are highly dangerous. Please stay away from crowds during the flight. Improper assembly, damage to parts, operating errors, etc. may cause the aircraft to lose control and accidents. Please pay attention to safety!
Age suggestion: This product is not a toy, only8Use under the guidance of an adult over the age of
Packing box single frame packing size 87*18*10 cm.
Installation steps
- When installing left and right sides of the fuselage, you need to adjust the motor and ESC link to confirm the direction of rotation(Adjust the first-person propeller to turn clockwise, the words on the propeller are forward,The propeller is forward and reverse, such as the number on the propeller is facing the direction of the nose. The propeller is clockwise and can be adjusted arbitrarily if viewed from the rear.2Root motor wire adjustment.The steering gear rocker arm is energized back to the center and installed in place, glue on both sides of the installation body to assemble it into the slot, and fix it for a few seconds before letting go.
- Install aileron rudder angle , , Install the aileron wire
- The battery is placed in the front battery position of the cabin, and the center of gravity is near the reinforcing rod under the wing. After adjusting the center of gravity, the battery needs to be fixed firmly.
- Scan the code below to see the tutorialfor reference only
-