![](https://img.alicdn.com/imgextra/i3/61322388/T2zExlXndMXXXXXXXX_!!61322388.jpg)
![](https://img.alicdn.com/imgextra/i3/61322388/T20ahJXotXXXXXXXXX_!!61322388.jpg)
Product Name: Shift Rod Dust Boot (Genuine Leather)
Material: first layer of yellow leather
Color: black leather and red thread black leather and black thread, anti-fur, red leather
Suitable models: Honda Hatchback Fit manual transmission
Remarks: This dust cover is only a leather case, it will not be framed on the base of the gear head. When installing, use the base and other accessories removed from the original car''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s dust cover.
Included: a stick of viscose
![](https://img.alicdn.com/imgextra/i4/61322388/T2O.VlXlxMXXXXXXXX_!!61322388.jpg)
★First generation fit: 04-07 models(The dust cover of the original car is a circle of rubber, changed to a leather dust cover)
★Second-generation Fit: 08-13 models(The dust cover of the original car is the kind of artificial leather)
★Three generations of Fit: 14-18 models
Installation renderings of some buyers:
★★★ Second-generation Fit disassembly and assembly ★★★
①, unscrew the gear head counterclockwise, remove the screw in the yellow circlePull the board back and pull out the panel;
② After pulling out the panel, you can remove the base of the dust cover;
③The top of the dust cover is tied to the plastic ring removed from the dust cover of the original car. The bottom of the leather cover is stapled to the plastic base of the original car with a stapler;
★★★ Disassembly and assembly of the first generation of Fit ★★★
① Unscrew the gear head counterclockwise and remove the panel. The method is similar to that of the second-generation Fit. After removing the panel, remove the rubber dust cover of the original car, and apply glue to the bottom of the leather dust cover. Then glue it to the base of the bright frame;
②, enter the following picture after bonding:
③Tie the upper mouth of the dust cover on the rubber ring with iron wire or tie strips(Buy the old fit dust cover now, and both will give you a rubber ring and a glue), You can put it on the gear lever.
★★★ Three-generation Fit Disassembly and Assembly ★★★
Similar to the second-generation Fit, it is also counterclockwise to unscrew the gear head, remove the channel enclosure, and then remove the dust cover of the original car(There are a lot of dust cover replacement operations in the Fit Auto Forum, you can search for it yourself)
①, remove the staples of the base, remove the old dust cover, you can also cut off the old dust cover directly, saving trouble.
②Apply glue to the bottom of the dust cover and the inner frame of the base to fix the leather case inside the base; then tie the upper opening of the dust cover to the plated ring that was removed from the original car with a tie.
The following is anti-fur dust cover, if you need to buy please contact the shopkeeper
![](//gd4.alicdn.com/imgextra/i4/61322388/TB2UK7gbXXXXXa1XXXXXXXXXXXX_!!61322388.jpg)