Product name:Sony camera infrared wireless remote control
Product introduction:The remote control can operate the camera to release the shutter from a long distance from the front of the camera, and the operating radius is about 5 meters. It can play a great role in scenes such as group photos of friends gathering and landscape photography that needs to avoid jitter.
Applicable models:Sony A6000 A7 A7R A7S NEX-6 NEX-7 NEX-5T NEX-5N NEX-5C A33 A55 A57 A65 A77 A99 A230 A290 A330 A390 A450 A500 A550 A560 A580 A700 A900 and other models
Product Features:The infrared remote control can remotely control the release of the shutter. Just like selfies, this controller can be used to take selfies and avoid camera shake when the shutter is pressed.
battery:1 CR2025 button battery
size(Length x width x thickness):Approximately 75x40x6 mm
weight:About 15 grams
Tips:ILCE-5000/A5000 A5100 NEX-F3 NEX-3N NEX-C3 A35 A37 A100 A200 A350 A750 A850This remote control cannot be used without infrared function!
Instructions:
Before use, you should unplug the transparent plastic insulating sheet in the battery compartment of the remote control, and set the camera to remote camera mode. For details on how to set the camera to remote camera mode, please refer to the instruction manual of the respective camera. Point the remote control at the remote control receiving window of the camera, and press the button from the front of the camera. It can control the camera to focus automatically and open the shutter. It does not support Bulb.
1. NEX (except C3, F3, 3N): Enter the FN button menu of the camera, or the shortcut key is the left key of the arrow key in standby mode to enter, and then exit after selecting the infrared remote control mode.
2. A7/A7R: Enter the MENU button page, enter the camera settings on the far right and the third line on the third page, and then exit.
3. Remember to turn off the “Portrait Selfie Timer” function after the screen is rotated 180 degrees, otherwise the remote control cannot be used.
Some points should be noted when using infrared remote control:
1. The machine itself must be adjusted to accept remote control.
2. Because it is an infrared remote control, the reason is the same as that of a TV remote control, which is linear transmission.
3. The best angle of the remote control is the front of the lens + 30 degrees to the right, which is the same as the original remote control, other angles cannot be guaranteed.
5. If you are unable to focus, the remote control will not produce results.
![](https://img.alicdn.com/imgextra/i3/27707660/TB2y0rZmXXXXXaUXXXXXXXXXXXX_!!27707660.jpg)
![](https://img.alicdn.com/imgextra/i4/27707660/TB2e8TUmXXXXXbuXXXXXXXXXXXX_!!27707660.jpg)