Product name hood
Model ALC-SH108
Material ABS environmental protection plastic
Compatible with original Sony ALC-SH108
Applicable lens
Sony 18-55mm 18-70mm
Function: The hood can effectively block the stray light from directly hitting the front lens, protect the lens, and prevent rain and dust from falling on the front lens.
Advantages: Youyongjia hood is made of ABS environmental protection material, quality assurance, and support for reverse installation. You can easily put on the middle pinch lens cover without removing the hood. Whether it is workmanship or function, it is comparable to the original brand hood!
![](https://img.alicdn.com/imgextra/i2/317846265/TB2Qln4qhdkpuFjy0FbXXaNnpXa_!!317846265.jpg)
The lens hood is a common photographic accessory set in front of the camera lens. It has the following functions:
1. In the backlight, side light or flash photography, it can prevent the entry of non-imaging light and avoid fog.
2. It can avoid the surrounding scattered light from entering the lens when shooting in front light and side light.
3. In lighting photography or night photography, you can avoid the surrounding interference light from entering the lens.
4. It can prevent accidental damage to the lens, and it can also prevent fingers from touching the surface of the lens by mistake. It can also shield the lens from wind, sand, rain and snow to some extent.
Lens hoods are widely used in backlight photography, generally speaking, to avoid glare. However, if the light source is close, glare may still occur. At this time, you can use your hand to block the hood on the side where the light source is located. Whether the glare is eliminated, you must observe it clearly in the viewfinder.
Its functions are as follows:
1. In the backlight, side light or flash photography, it can prevent the entry of non-imaging light and avoid fog.
2. It can avoid the surrounding scattered light from entering the lens when shooting with forward light and side light.
3. In lighting photography or night photography, it can prevent the surrounding interference light from entering the lens.
4. It can prevent accidental damage to the lens, and it can also prevent fingers from accidentally touching the surface of the lens. It can also shield the lens from wind, sand, rain and snow to some extent.