The above five brackets are not only the difference in height, the height is the secondary one, and they can be adjusted directly. The most important difference is that the difference in strength and load-bearing is very obvious. It is recommended that the DL90/DL95 series lamp body weighs about 2 kg with 1.75 m and 1.6 m brackets, and the H series lamp body is recommended to use 1.8 m and 1.72 m brackets with a dead weight of more than 4 kg.
The following is about 1.72 meters/1.8 metersMagnesium aluminum alloyLarge bracket, super strong and durable, there is no problem when people stand on it, and the weight of an adult can also bear the weight.
Because the H series lamp holder is too heavy, you can ask other stores for the support before buying, can it be so strong.
The five brackets will be introduced in turn
The following is a large support SOMAIT of about 1.8 meters705 detailed introduction
The bracket as a whole, including the gimbal part and the locking tube are all made of magnesium alloy
The following is a large bracket 663 of about 1.72 metersDetailed introduction
The bracket as a whole, including the gimbal, is made of magnesium alloy
product description:
The tripod is mainly composed of high-quality magnesium-aluminum alloy, and adopts a plug-in structure to adjust the angle of the tripod to meet the requirements of different grounds; the toggle-type leg tube locking method makes the user more convenient and faster to unfold and retract the feet frame.
advantage:
1. The plug-in type angle adjustment structure is convenient and stable. At the same time, it ensures that the angle of the three legs can be adjusted independently. Each leg has30degree,60degree,90degree3Stalls
2. The disc wing-shaped lifting tube locks the knob to make the lifting tube expand and contract more easily;
3. Humanized counterweight hook design;
4. The middle pole is inverted: the lifting tube can be drawn out to achieve reverse shooting;
5. The international universal clamp panel, the panel is detachable, and has a safety device
6. The joint thread of the tripod is the international M1/4", which can ensure smooth connection with all current optics, digital cameras and camcorders. Suitable for both traditional cameras, digital cameras and small camcorders
7. Pull rod lifting + 3 sections lifting tripod, three-dimensional pan-tilt, 360-degree rotation, 90-degree side shooting
8. The horizontal rotation of the three-dimensional gimbal has a damping device, which makes it feel very good!
Shrink height: 500mm
Maximum working height: 1720mm
Minimum working height: 470mm
Maximum pipe diameter: 24mm
Net weight: 1600g
Maximum load: 10kg
The following is a large bracket of about 1.85 metersBlack detailed introduction
The bracket is made of aluminum alloy as a whole
The gimbal is made of engineering plastics
The following is a large bracket of about 1.75 metersBlack detailed introduction
The bracket is made of aluminum alloy as a whole
The gimbal is made of engineering plastics
The following is a detailed introduction of the large bracket WEF353 about 1.6 meters
The bracket is made of aluminum alloy as a whole
The gimbal is made of engineering plastics