Turning lights turn left and right are all yellow light in the middle is red light Press the arrow keys twice to return!
The white button type and the green button type are just different colors of the buttons on the remote control. The others are the same~!
【Features】
1. The dual-purpose design of tail light and turn signal is convenient and practical;
2. The turn signal arrow is displayed in yellow light, which is simple and clear;
3. Wireless remote control operation, simple and convenient;
4. Power saving, USB interface charging, the charging voltage does not exceed 4.2V, it can be charged and discharged reciprocally, the charging speed is fast, and the discharge time is long. Generally, the charging is 2 hours, and the discharge time is about 3-4 hours;
5. Easy to install, the host is fixed on the saddle tube with a car buckle, and the remote control is fixed on the handlebar tube with a strap;
6. Life is waterproof. The key switch and USB charging interface are covered by swelling rubber, but diving is not supported. Wipe clean in time after being exposed to rain, and store in a dry place;
7. Belt buckle strap design, applicable thickness seat tube 1-3.2CM, front and rear fine forks are available.
8. Horizontal and vertical base design, when you don''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''t want to use the steering function, you can install it horizontally and vertically.
Installation Notes
1. First pull the fixing bracket socket of the tail light upwards and tighten the strap to fasten it on the car tube. Then insert the tail light switch upwards into the socket of the bracket.
2. Pull the rubber band of the remote control inward and go around the handlebars of the car, tighten and fasten it.
3. Please keep the charging cable separately.
Instructions
1 Before use, press and hold the power button of the tail light for 4-6 seconds to confirm that the button light flashes.
2Then press and hold the middle button of the remote control for 3 seconds to confirm the induction connection.
3 The middle button on the remote control can control the red LED warning light of the tail light, and the left and right buttons respectively control the yellow LED direction indicator light on the tail light.
Battery and charging instructions
taillight:
1 Use the built-in 800Mah rechargeable battery. When charging, please press and hold the upper card board of the bracket inward to pull out the taillight, open the rubber charging port protector on the back of the taillight, insert the Micro plug and use the USB charging cable to charge.
2. The red indicator light of the charging port is on when charging, and the indicator light is green when it is fully charged.
3. The charging time is 2 hours, and it can be used for 3-4 hours after being fully charged.
4. Note that the battery inside the tail light is not allowed to be replaced by yourself.
remote control:
1. Use a CR2025 3V lithium battery.
2. Open the battery cover on the back of the remote control to replace it yourself.