Minimum order of ten
Product name: hood
Model: HB-36
Material: ABS environmental protection plastic
Interface type: bayonet
Applicable lens:Nikon 70-300mm f/4-5.6G VR ED
Caliber: 67mm
Note: Do not buy the wrong model. There are several models of 70-300mm, and the corresponding hoods are of different models. Please go to the store to search for specific models to buy!
HB-26: Nikon AF 70-300mm f/4-5.6G(62 caliber old style)
HB-36: Nikon 70-300mm f/4.5-5.6G IF-ED VR(67 caliber The New)
Customers who don’t know the lens diameter and lens model, please refer to the picture below to compare the camera on hand
The lens hood is a common photographic accessory set in front of the camera lens. It has the following functions:
1. It can prevent the entry of non-imaging light and avoid fog when shooting in backlight, side light or flash photography.
2. It can prevent the scattered light from entering the lens when taking photos with forward light and side light.
3. In lighting photography or night photography, it can prevent the surrounding interference light from entering the lens.
4. It can prevent accidental damage to the lens, and it can also prevent fingers from accidentally touching the surface of the lens. It can also shield the lens from wind, sand, rain and snow to some extent.
Lens hoods are widely used in backlight photography, generally speaking, to avoid glare. However, if the light source is close, glare may still occur. At this time, you can use your hand to block the light shield on the side where the light source is located. Whether the glare is eliminated, you must observe it clearly in the viewfinder.
Its functions are as follows:
1. It can prevent the entry of non-imaging light and avoid fog when shooting in backlight, side light or flash photography.
2. It can prevent the scattered light from entering the lens when taking photos with forward light and side light.
3. In lighting photography or night photography, it can prevent the surrounding interference light from entering the lens.
4. It can prevent accidental damage to the lens, and it can also prevent fingers from accidentally touching the surface of the lens. It can also shield the lens from wind, sand, rain and snow to some extent.