Light source: XPE LED
Power supply: Use 3 AAA batteries, the price does not include batteries!
Shell: Aluminum alloy + PC cover
Size: 32-50MM wide and 110-160MM long
Weight: 100g
Brightness: The overall irradiation diameter is about 5 meters
Battery life: about 10 hours, the battery capacity will vary
![](//img.alicdn.com/imgextra/i2/613857/TB2HkF_aFXXXXaVXXXXXXXXXXXX_!!613857.jpg)
![](//img.alicdn.com/imgextra/i3/613857/TB2qsN1aFXXXXaOXpXXXXXXXXXX_!!613857.jpg)
![](//img.alicdn.com/imgextra/i4/613857/TB2trBZaFXXXXbLXpXXXXXXXXXX_!!613857.jpg)
![](//img.alicdn.com/imgextra/i1/613857/TB2Vmh0aFXXXXaPXpXXXXXXXXXX_!!613857.jpg)
![](//img.alicdn.com/imgextra/i4/613857/TB21pl8aFXXXXbSXXXXXXXXXXXX_!!613857.jpg)
![](//img.alicdn.com/imgextra/i2/613857/TB2HSV2aFXXXXXMXpXXXXXXXXXX_!!613857.jpg)
![](//img.alicdn.com/imgextra/i3/613857/TB2PjX3aFXXXXXqXpXXXXXXXXXX_!!613857.jpg)
![](//img.alicdn.com/imgextra/i4/613857/TB2hKX0aFXXXXbKXpXXXXXXXXXX_!!613857.jpg)
![](//img.alicdn.com/imgextra/i3/613857/TB2wfR7aFXXXXckXXXXXXXXXXXX_!!613857.jpg)
![](//img.alicdn.com/imgextra/i4/613857/TB2.lp4aFXXXXc7XXXXXXXXXXXX_!!613857.jpg)
Use 3 AAA batteries, the price does not include batteries!
![](//img.alicdn.com/imgextra/i2/613857/TB2aZR1aFXXXXaZXpXXXXXXXXXX_!!613857.jpg)
Then press the switch
![](//img.alicdn.com/imgextra/i4/613857/TB2bvpYaFXXXXckXpXXXXXXXXXX_!!613857.jpg)
![](//img.alicdn.com/imgextra/i4/613857/TB2WhV0aFXXXXa8XpXXXXXXXXXX_!!613857.jpg)
![](//img.alicdn.com/imgextra/i4/613857/TB2aCX1aFXXXXajXpXXXXXXXXXX_!!613857.jpg)
1. Install the battery
Open the battery cover, insert 3 5 batteries according to the positive and negative directions in the battery box, and then close the battery cover. Pay attention to the sealing of the battery cover and the battery box.
●Note that the batteries used must be of the same specification and model.
●Avoid mixing new and old batteries.
2. Adjust the elastic band
According to the size of the individual''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s head circumference, the length of the elastic band can be tightened and loosened by the 2 adjusting buckles on the elastic band until it is comfortable and satisfactory.
●Suggestion: If you need to wear it for a long time, it should be appropriately wide to avoid head discomfort.
3. Turn on the lights and use
After wearing the headlight correctly, press the switch at the bottom of the headlight to select the appropriate working mode according to the environment and lighting needs. At the same time, the headlight can be rotated up and down to adjust the illumination angle
degree.
The switch directly switches the main light and auxiliary light without dimming function.
●If you find that the headlamp and the bracket are too loose to fix the lamp head, use a Phillips screwdriver to properly tighten the bracket screws.
2. Use environment
Avoid using in extremely hot and cold environments where the temperature exceeds 60°C or below minus 30°C, otherwise the service life of the LED and battery will be reduced. EXPLOR series users
The waterproof design of the outer headlight is only rainproof (IPX4), so it cannot be used in diving, otherwise it may cause the headlight to seep water and cause circuit failure.
Three, maintenance and cleaning
●Please choose high-quality alkaline batteries of the same model.
●Keep the elastic band dry after each use.
●If the elastic band is dirty, it must be disassembled and cleaned separately, and assembled as it is after it has been allowed to dry.
●Avoid rubbing the front lens of the lampshade with other hard objects, which will cause the lens to wear and affect the light transmission.
●If stored for a long time, take out the battery in the battery box to prevent the alkaline battery from leaking and causing corrosion of the pole pieces in the tank.
●Warning: The battery may explode when thrown into fire.
Four, common faults and solutions
The LED does not light up when the switch is pressed.
●Please check whether the battery is installed correctly according to the positive and negative instructions in the battery compartment.
●Check whether the battery is used up, and note that you must use the same type of battery to avoid mixing old and new batteries.
●Check whether the pole pieces in the battery compartment are corroded. If there is a bad contact caused by corrosion, please use a knife or emery cloth to gently polish the corrosion on the pole piece surface.
●Whether the xenon lamp is in poor contact.